Bedienungsanleitung Bomann KG 7333 (Seite 21 von 28) (Deutsch, Englisch)

754672

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

 Loosen the hinge and screw cover on the top of

the device and disconnect the respective plug

connections.

 Detach the door contact switch from the hinge

cover and insert it into the delivered hinge cover.

 Disomount the upper door hinge and lift out the

fridge door.

 Remove the door stopper on the door underside

and attach the delivered door stopper to the other

door underside.

 Dismount the middle door hinge. Lift out the free-

zer door.

 Remove the door stopper on the door underside

and attach the delivered door stopper to the other

door underside.

 Move the blind plug on the door topside and set

the door safely aside.

 Tilt the device slightly backwards and block it in

this position. Unscrew the feet and dismount the

lower door hinge.

 Transfer and attach the lower door hinge to the

opposite device side; after you have unscrewed

the hinge pin and inserted it from the other side of

the hinge. Screw in the feet accordingly.

 Put the device back in the upright position. Move

the blind plugs to the exposed holes of the middle

door hinge.

 Put on the freezer door and fix it in the intended

position.

 Rotate the middle door hinge by 180°, move and

fasten it on the opposite device side.

 Put on the fridge door and fix it in the intended

position.

 Transfer and fasten the upper door hinge on the

opposite device side; after you have unscrewed

the hinge pin and inserted it from the other side of

the hinge.

 Connect the respective plug connections and

fasten the hinge and screw covers accordingly.

 Check the door rubber seal for an exact fit and, if

necessary, bring it into the correct position.

Check that the doors are aligned vertically and hori-

zontally to ensure proper opening and closing of the

doors.

Startup / Operation

Prior to first use

CAUTION:

After transport, the appliance should be left standing

upright for four hours before connecting to the power

supply. Nonobservance could lead to malfunction of

the cooling system and causes an appliance break-

down.

Clean the appliance interior including all accessory

parts. Consider the instructions which we provide in

the chapter “Cleaning and Maintenance”.

Starting the appliance

 Connect the appliance to the power supply.

 Operate the temperature control. See also the

section "Settings".

Settings

Setting [ OFF ] means that the appliance is in the off

state. Turn the temperature control clockwise, start-

ing from this setting; the appliance will turn on auto-

matically.

Temperature control

The power levels [ COLD –

COLDEST ] regulate the differ-

ent values of the internal tem-

perature.

Power level COLD:

lowest level → warmest internal temp.

Temperature range approx. +4°C∼+10°C

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bomann KG 7333 Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info