Bedienungsanleitung Bomann KS 2184 (Seite 19 von 28) (Deutsch)

688028

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

NOTE

NOTENOTE

NOTE:

• When installing, ask another person to assist.

•

You possibly need:

screw wrench, Phillips screw-

driver as well as a thin-blade screwdriver.

• Loosen the screws at

the appliance rear and

remove the top cover.

• Dismount the upper door hinge and

the opposite screws. Open the ap-

pliance door a little and lift it out.

Place the appliance door safely

aside.

• Tilt the appliance slightly backwards and block it

in this position. Unscrew the

feet and dismount the lower

door hinge.

• Attach the door hinge at the

other appliance side, after

you have unscrewed the

hinge pin (1) and used it at

the other hinge side (2).

Turn in the feet accordingly.

• Replace the appliance upright. Put the appliance

door on the hinge pin and fix it in its intended po-

sition.

• Transfer the upper door hinge

and the screws on the respective

opposite appliance site. Put the

hinge pin in the hole of the appliance door and

tighten the screws.

• Replace the top cover,

which you have removed

at the beginning and

tight the screws.

• Check if the door is aligned vertically and horizon-

tally optimally so that the smooth opening and

closing of the door is guaranteed.

• Dismount the door handle and attach it to the

corresponding other door outer side. Refer to the

instructions in "Assembling the door handle".

Transfer the cover caps on the exposed holes to

the respective other door outer side.

Reverse the freezer door opening

Reverse the freezer door openingReverse the freezer door opening

Reverse the freezer door opening

• Keep the freezer compartment

door closed. Dismount the hold-

ing (1).

• Remove the freezer door including

the upper hinge pin cover (a) to the

below.

• Dismount the snapper (2) and

attach it to the opposite side.

• Seal the now exposed

holes with the supplied

plugs (b).

Turn the door by 180° and trans-

fer it to the opposite side. Move

the upper hinge pin cover (a) ac-

cordingly.

• Keep the freezer compartment

door closed. Attach the holding

(1) on the opposite side.

Startup / Operation

Startup / OperationStartup / Operation

Startup / Operation

Prior to first use

Prior to first usePrior to first use

Prior to first use

CAUTION

CAUTIONCAUTION

CAUTION:

After transport, the appliance should be left standing

upright for about 4 hours before connecting to the

power supply. Nonobservance could lead to malfunc-

tion of the cooling system and causes an appliance

breakdown.

Clean the appliance interior including all accessory

parts. Consider the instructions which we provide in

the chapter “Cleaning and Maintenance”.

Starting the appliance

Starting the applianceStarting the appliance

Starting the appliance

• Connect the appliance to the power supply.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bomann KS 2184 Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info