normal for a smal l amount of water to come out of the salt container.It is
1. The salt container must only be refilled when the salt warning light in the control panel comes on.
Depending on how fully the salt dissolves, the salt warning light may still be on even though the
salt container is filled.
If there is no salt warning light in the control panel (For some Models),you can judge when to loa d
the salt into the softener by the cycles that the dishwasher had run.
2. If there are spills of the salt, a soak or a rapid program should be run to remove the excess salt.
Always use salt intended for use with dishwasher.
The salt container is located beneath the basket and should be filled as follows:
Attention!
Only use salt specifically designed for use in dishwashers! All other types of
salt not specifically de signed fo r use in a dishwasher, especially table salt, will
damage the water softener. In case of damages caused by the use of unsuitable
salt the ma nufacturer does not give any warranty nor is liable for any caused
damages.
Only fill with salt just before starting one of the comp lete washing p rogrammes.
This will prevent any grains of salt or salty wate r, which ma y have been split,
remaining of the bottom of the machine for any period of time, which may cause
corrosion.
5
A Remove the basket and then unscrew and remove the cap from the salt container.
B Before first wash, add 1lt. of water in the salt container of your machine.
C Place the end of the funnel (supplied) into the hole and introduce about 1kg of salt.
D After f illing the container , screw the cap tightly back clockwise.
E Usually, the salt warning light will be cease to be illuminated withi n 2-6 days after the salt container has been fille d with
salt.
F Immediately after filling the salt into the salt container, a washing programme should be started
Otherwise filter system, pump or other important parts of the machine may be damaged by salty
water. It is out of warranty.
If your model have water softener, you may skip this section.no
The rinse aid is released during the final rinse to prevent water from forming droplets on your dishes. That can leave
spots and streaks. It also improves drying by allowing water to sheet off the dishes. Your dishwasher is designed to
use liquid rinse aids. The rinse aid dispenser is located inside the door next to the detergent dispenser. To fill the
dispenser, open the cap and pour the rinse aid into the dispenser until the level indicator turns completely black.
The volume of the rinse aid container is about 110ml.
Rinse Aid Dispenser
Function of Rinse Aid
Rinse aid is automatically added during the last rinse, ensuring thorough rinsing, and spo t and streak free drying.
