Bedienungsanleitung Bora Pro - PKI 11 (Seite 25 von 36) (Englisch)

714108

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

Operation

www.bora.com

INFO The knob ring position for the heat retention level

is between the 12 o’clock position and the 1

o’clock position.

 Turn the selector ring approximately 15° clockwise

from the 12 o’clock position until it lightly engages.



appears in the control knob display.

 Press the touch surface on the control knob for

1 second to activate the heat retention level 1.



This is confirmed with an acoustic signal and the

symbol

is displayed.

Heat retention level 1 2 3

Symbol

. ; *

Temperature in °C 42 74 94

Tab. 6.2 Temperatures of heat retention levels

Increase heat retention level

 Press the touch surface on the control knob a second

time for 1 second to activate heat retention level 2 (

 Press the touch surface on the control knob a third

time for 1 second to activate heat retention level 3 (



This is always confirmed with an acoustic signal and

the corresponding symbol is displayed.

Reduce heat retention level



After setting heat retention level 3, pressing the touch

surface (1 second) again reduces the level by 1.



This is always confirmed with an acoustic signal and

the corresponding symbol is displayed.

Switching off heat retention level

The heat retention level activated switches off if you

 select another power level

 switch off the cooking zone

6.2.6 Childproofing feature

INFO The childproofing feature can only be activated or

permanently deactivated if both knob rings are at

the 12 o’clock position and no function is active.

Activating the childproofing feature

 Press the touch surface of one of the control knob for

5 seconds.



An acoustic signal is heard and

is displayed.

The display goes blank after 10 seconds and the

childproofing feature is activated.

6.2.3 Automatic heat up function

Switching on the automatic heat up function

INFO The exact values for the heat-up time can be

found in the Device description section.

 Select the desired power level (= later continuous

cooking level).

 Within 3 seconds of setting the power level, press the

touch surface of the control knob for at least 1 second.



The automatic heat up function is activated and the

control knob shows an

in front of the continuous

cooking level selected (e.g.

INFO When the automatic heat up function is active,

is displayed.



Once the automatic heat up period has passed, the

power is reduced to the selected continuous cooking

level.



If a higher continuous cooking level is selected while

the automatic heat up function is active, the new heat-

up time is automatically valid.

6.2.4 Switching off the automatic heat up

function

The activated automatic heat up function will end

prematurely if you

 reduce the power level (continuous cooking level).

 set power level

 activate power setting

ßp

 activate heat retention level

 switch off the cooktop.

6.2.5 Heat retention level

Activating the heat retention level

15°

Fig. 6.3 Knob ring setting for heat retention level

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bora Pro - PKI 11 Seite 25

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Bora Pro - PKI 11

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info