Bedienungsanleitung Bora Pro - PKI 11 (Seite 26 von 36) (Englisch)

714108

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

Operation

www.bora.com

Activating the timer function

 Once you have confirmed the time set, you have

3 seconds to turn the knob ring to the power level

you want.



This activates the timer function and the time starts to

count down.



The displays swaps (for 3 seconds each) between the

ower level and the remaining time (accurate to the

minute for more than 2 minutes and accurate to the

second for under 2 minutes).



Once the remaining time is less than 2 minutes, only

the time is displayed.



At the end of the time, the cooking zone is switched

off, a beep sounds for 2 minutes and the control knob

display flashes



The flashing and the beeping can be stopped by

pressing the touch area or twisting the knob ring to the

12 o’clock position.

Switching the timer off early:

 Twist the knob ring to the 12 o’clock position.



The control knob display changes to

, a beep sounds

and the cooking zone switches off.

Activating the short-time timer (egg timer)

 Once you have confirmed the time set, you have

3 seconds to turn the knob ring to the 12 o’clock

position.



This activates the short-time timer and the time starts

to count down.



The displays shows remaining time (accurate to the

minute for more than 2 minutes and accurate to the

second for under 2 minutes).



At the end of the time, a beep sounds for 2 minutes

and the control knob display flashes



The flashing and the beeping can be stopped by

pressing the touch surface.

Switching off the short-time timer (egg timer) early:

 Press the touch surface of the knob ring.



The short-time timer is deactivated.



The control knob display shows

and a beep sounds.

6.2.8 Pause function

Activate pause function

 Press the touch surface of the control knob for 1

second.



A signal tone is heard and

is displayed.



The cooking session is interrupted.

INFO The cooking session can be paused for a

maximum of 10 minutes. If the pause function is

not deactivated in this time, the relevant cooking

zone is switched off.

Permanently deactivating the childproofing

feature

 Press the touch surface of one of the control knob for

5 seconds.



An acoustic signal is heard and the display changes

. The display goes blank after 10 seconds and the

childproofing feature is permanently deactivated.

Deactivating the childproofing feature for a

cooking session

 Turn the knob ring from the 12 o-clock position to

a power level.



is displayed.

 Press the touch surface of the control knob for

5 seconds.



An acoustic signal can be heard and the control knob

display shows the power level selected.



The childproofing feature is only deactivated for this

cooking session and you can set the power level you

want.



The childproofing feature is reactivated next time you

switch on.

INFO If the cooktop is switched off at the end of the

cooking session (turn the selector ring to the

12 o’clock position), the childproofing feature is

automatically re-activated.

6.2.7 Using the timer function

INFO You can set a time range of between 1 and

120 minutes for the timer functions.

Set time

 Twist the knob ring to the 11 o’clock position.



t appears on the control knob display.

 Press the touch surface for one second.



A beep can be heard and the control knob display

switches to

 Within 3 seconds, twist the knob ring to set the timer

time.



Turning clockwise increases the time (starting at

0 minutes), while turning anticlockwise reduces the

time (starting at 120 minutes).



In the range from 0 to 20 minutes, the time reduces/

increases in both directions by one minute at a time,

while the increments are 5 minutes for the rest of the

range.



If no time is set within 3 seconds, the timer is

deactivated and the control knob display switches to

 Press the touch-surface within 3 seconds to confirm

the time set.



A beep sounds and the set value starts to flash on the

control knob display.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bora Pro - PKI 11 Seite 26

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Bora Pro - PKI 11

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info