714374
26
Zoom out
Zoom in
Vorherige Seite
1/44
Nächste Seite
EN
26
Installation
www.bora.com
Changing the gas burner nozzle in the gas
burner
INFO The gas type and pressure may only be changed
by a certified engineer or BORA service
technician. He/she also assumes responsibility
for the proper gas installation and commissioning.
1
2
3
4
5
6
Fig. 5.25 Gas burner structure
[1] Burner cap
[2] Burner head
[3] Electric igniter
[4] Safety thermocouple
[5] Burner housing
[6] Gas burner nozzle
Remove the pan support.
Remove the burner cap [1] from the burner head [2].
Remove the burner head [2] from the gas outlet.
1
2
Fig. 5.26 Cooktop burner with gas burner nozzle
[1] Gas burner
[2] Gas burner nozzle
Unscrew the gas burner nozzle [2] from the gas burner [1]
Screw on the corresponding nozzle for the gas type to
be used into the gas burner [2].
Put the burner parts back together again.
Position the burner head [2] correctly on the gas
outlet.
Ensure that the safety thermocouple [4] and the
electric igniter [3] are positioned in the correct
opening.
Position the burner cap [1] so that it fits perfectly,
sitting straight on the burner head [2].
If burner parts are not positioned correctly, the electric
igniter will not work.
Place the pan support straight on the gas burner so it
fits perfectly.
Set the gas type in the configuration menu (see point
5.8.4 Configuration of gas type and gas pressure).
Affixing the nozzle set nameplates
Affix the nozzle set nameplates supplied in the scope
of delivery to the space provided above the nozzle set
nameplate on the bottom of the cooktop (see fig. 5.27)
and on the back of these operating and installation
instructions.
Fig. 5.27 Axing the nozzle set nameplates
5.6.4 Nozzle table
INFO The nozzles regulate the maximum gas
throughflow for each burner and gas type/
pressure.
INFO The gas cooktop is set by default to natural gas
G20/20mbar (pre-assembled).
INFO Use only stamped and approved nozzles.
INFO The gas type and pressure may only be changed
by a certified engineer or BORA service
technician. He/she also assumes responsibility
for the proper gas installation and commissioning.
The stamp on the nozzles corresponds to the values in
the nozzle table and can be found either on the top or
side of the nozzles.
26

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Bora Pro PKG11 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Bora Pro PKG11

Bora Pro PKG11 Bedienungsanleitung - Deutsch - 44 seiten

Bora Pro PKG11 Bedienungsanleitung - Holländisch - 44 seiten

Bora Pro PKG11 Bedienungsanleitung - Französisch - 48 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info