Bedienungsanleitung Boretti Imperatore 2008 (Seite 61 von 68) (Deutsch, Englisch, Holländisch, Französisch)

533765

Zoom out

Zoom in

Vorherige Seite

1/68

Nächste Seite

Control panel

settings

Set clock:

• Press ”CLOCK” to set the time. Press once to

set the hour (hour light ﬂ ashes). Press twice to

set the minutes (minute light ﬂ ashes).

• Press “+” or “-” to set the time. Press “ENTER”

to conﬁ rm.

• When setting the oven:

• Press “CANCEL” to cancel the setting. The setting

will be automatically cancelled unless you press

“ENTER” within the next ten seconds.

Preheat

• The oven must always be preheated before use.

When you switch on the oven and set the temp-

erature, the preheat light will come on (PREHEAT).

As soon as the oven reaches the right temp-

erature, the light will switch off and a beep will

be emitted. The oven is now ready for use.

Set cooking temperature

• Turn the selector knob to the desired setting.

• Press “TEMP SET” to set the temperature.

• The temperature display will feature the standard

setting and light up.

• Press “+” or “-” to set the temperature.

The setting ranges from 40°C to 300°C.

• Press “ENTER” to conﬁ rm the setting.

• Press “CANCEL” to cancel the setting.

The setting will be automatically cancelled

unless you press “ENTER” within the next ten

seconds.

Set cooking time

• Turn the selector knob to the desired setting.

• Set the temperature to the desired level.

• Press “+” or “-” to set the cooking time, ranging

from 0 to 999 minutes.

• The 0 setting indicates the timer is switched

off. This means the oven will keep running.

• Press “ENTER” to conﬁ rm the setting.

• Press “CANCEL” to cancel the setting.

• The setting will be automatically cancelled

unless you press “ENTER” within the next ten

seconds.

• When the food is cooked, the oven will beep

5 times. The display will start flashing and

change to “000” until the knob is switched to

“OFF”.

• To terminate cooking prematurely, just set the

oven switch to “OFF”.

PLEASE NOTE: The timer cannot be set whilst the

oven is being cleaned.

Self-cleaning with pyrolysis

• The option “PYROLYSIS CLEANING” indicates

the oven has a pyrolytic self-cleaning cycle.

When the setting “PYROLYSIS CLEANING” is

activated, the temperature inside the oven rises

to the highest level for the combustion of dirt and

food residues. This cycle take about 3.5 hours.

• If both the left and right ovens are set to pyro-

lysis cleaning, this function will not work. It is

not possible to clean two ovens simultaneously.

• If one of the ovens is being cleaned, the other

cannot be used.

Preheat signal

• When the oven reaches the (set) cooking temp-

erature, the “PREHEAT” indicator will light up and

a beep will be emitted.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Boretti Imperatore 2008 Seite 61

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info