Bedienungsanleitung Bort BFP-400 (Seite 7 von 96) (Alle Sprachen)

555167

Zoom out

Zoom in

Vorherige Seite

1/96

Nächste Seite

Electric airless spray gun

THE NUMBERS MENTIONED IN THE TEXT

CORRESPOND WITH THE PICTURE SAT PAGE2.

TECHNICALSPECIFICATIONS

Voltage 230 V ~

Frequency 50 Hz

Powerinput 400 W

Maximum nozzle ﬂ ow rate 0 - 380 ml/min

Container capacity 800 ml

Weight 1,13 kg

PRODUCT INFORMATION A

1. Motor housing

2. Output control

3. Triggerswitch

4. Handle

5. Paintcontainer

6. Spray basket nozzle

7. Viscositycup

SAFETY INSTRUCTIONS

The following symbols are used in these instructions

for use:

Denotes risk of persona! injury, loss of life or

damage to the tool in case of non-obser-

vance of the instructions in this manual.

Denotes risk ofelectric sh ock.

Carefully read this manual before using the machine.

Make sure that you know how the machine functions

and how to operate it. Maintain the machine in accord-

ance with the instructions to make sure it functions

properly. Keep this manual and the enclosed documen-

tation with the machine.

Electrical safety

Warning! When usingelectric tools, basic safety

precautions should always be followed to reduce

the risk of ﬁ re, electric shock and personal injury.

Read all these instructions before attempting to

operate this product and save these instructions.

Always check that the mains voltage corre-

sponds to the voltage on the rating plate.

The machine is double insulated in accord-

ance with EN 50144; therefore no earth wire is

required.

No connection should be made to the earth

terminal of the plug. A 3 amp fuse should be

ﬁ tted. There are no user serviceable parts

inside. Always refer to qualiﬁ ed service personnel.

Do not allow this spray gun to be exposed to rain.

Replacing cables or plugs

Immediately throw away old cables or plugs when they

have been replaced by new ones. It is dangerous to

insert the plug of a loose cable in the wall outlet.

Using extension cables

Only use an approved extension cable suitable for the

power input of the machine. The minimum conductor

size is 1.5 mm

. When using a cable reel always un-

wind the reel completely.

ADDITIONAL SAFETY INSTRUCTIONS

- NEVERSPRAY AT PERSONS- Neveraim the nozzle

at another person or animal. Never allow the spray

to come in to direct con tact with the skin.

FLASH POINT - This spray gun must not be used for

spraying ﬂ ammable paints and solvents with a ﬂ ash

point of less than 32°C

VENTILATION - Always make sure that there is ad-

equate ventilation in the work area when spraying.

- BASKET NOZZLE - Always keep the spray basket

nozzle in piace during use.

- CONSIDER WORK AREA ENVIRONMENT - Do not

use spray guns where there is a risk of ﬁ re or explo-

sion.

- BEWARE OF ANY HAZARD - Beware of any hazard

by the material being sprayed and consult the mark-

ings on the container or the information supplied by

the manufacturer.

- DO NOT SPRAY-Do not spray any material where

the hazard is notknown.

- USE EYE PROTECTION - Always use appropriate

eye protection to keep hazardous vapours or fumes

out of the eyes.

- WEAR A MASK - Never operate a spray gun without

wearingaface mask.

- PROTECT YOUR EARS - Wear ear protectors if the

sound pressure exceeds 85 dB(A).

- MAINTAIN YOUR TOOLS - Keep your spray gun,

paint container and nozzles clean. Do not clean with

ﬂ ammable liquids with a ﬂ ash point less than 32°C

Inspect the mains lead periodically and if damaged

have it replaced by a qualiﬁ ed person.

- NAKED FLAMES - Never spray near a naked ﬂ ame

or appliance pilotﬂ ame.

- SMOKING - Neversmokewhilstspraying. THINNING

- Always read the paint manufacturers thinning rec-

ommendations or instructions before using paint or

other materials.

- DISCONNECT FROM THE MAINS SUPPLY - Al-

ways disconnect from the mains supply when ﬁ lling

the paint container or cleaning the spray gun.

- SWITCH OFF WHEN NOT SPRAYING - Avoid run-

ning the unit with the ﬂ ow rate knob fully closed for

any length of time.

We accept no responsibility for damage caused by

the use of unsuitable substances, or paints that hare

not been thinned correctly, and any health hazards

that arise from lack of adequate ventilation

English

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bort BFP-400 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info