Bedienungsanleitung Bort BFP-400 (Seite 9 von 96) (Alle Sprachen)

555167

Zoom out

Zoom in

Vorherige Seite

1/96

Nächste Seite

Air ﬁ lter cleaning F

• Unscrew the air ﬁ lter cover (A).

• Remove ﬁ lter element and wash well in solvent.

• Replace the ﬁ lter element and air ﬁ lter cover (A).

• Be sure the ﬁ lter cover seals properly all around.

TROUBLE SHOOTING

Motor hums but does not spray or irregular spray-

ing.

1. Worn swirl head

Replace swirl head.

2. Pick up pipe not into the right position

Re-adjust pick up pipe.

3. Blocked pick up pipe

Clean with thinner.

4. Blocked nozzle

Clean nozzle.

5. Blocked ﬁ lter

Clean with thinner.

6. Control knob needs adjustment

Adjust.

Atomization is not good.

1. Volume adjustment is not correct.

Adjust

2. Paint too thick

Check viscosity of the paint

Over painting.

1. Spray gun not clean, or not lubricated, resulting in

piston being stuck in cylinder

Disassemble spray gun and dean with thinner.

2. Too much paint

Adjust the volume clockwise to reduce spraying.

Two t/i/n coats are better then one thick coat.

3. Viscosity too low

Check viscosity

Motor louderthan normal.

1. Spray gun not clean, or not lubricated, resulting in

piston being stuck in cylinder

Disassemble spray gun and clean with thinner.

No spray, no sound.

1. No electricity

Check power supply.

Operating sound not right.

1. Poor output adjustment

Re-adjust

2. Not enough paint in the container resulting in air

being sucked in.

Reﬁ ll with paint

3. Not diluting properly or not passing pick up pipe

completely.

Check pick up pipe and viscosity level.

«Orange Skin» excessive fogging.

1. Incorrectsolventis used

Use correct solvent

2. Spray gun too far from the surface.

Hold spray gun closer to Vie object

3. Paint too thick

Thin the paint

MAINTENANCE

Make sure that the machine is not live when

carrying out maintenance work on the motor.

The SBM Group machines have been designed to oper-

ate over a long period of time with a minimum of main-

tenance. Continuous satisfactory operation depends

upon proper machine care and regular cleaning.

Cleaning

Regularly clean the machine housing with a soft cloth,

preferably after each use. Keep the ventilation slots

free from dustand dirt.

If the dirt does not come off use a soft cloth moistened

with soapy water. Never use solvents such as petrol,

alcohol, ammonia water, etc. These solvents may dam-

age the plastic parts.

Faults

Should a fault occur, e.g. after wear of a part, please

contact your local SBM Group dealer. In the back of

this manual you ﬁ nd an exploded view showing the

parts that can be ordered.

ENVIRONMENT

In order to prevent the machine tram damage during

transport, it is delivered in a sturdy packaging. Most of

the packaging materials can be recycled. Take these

materials to the appropriate recycling locations. Take

your unwanted machines to your local SBM Group-

dealer.

Here they will be disposed of in an environmentally

safe way.

GUARANTEE

The guarantee conditions can be found on the sepa-

rately enclosed guarantee card.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bort BFP-400 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info