Bedienungsanleitung Bosch 3600 HA2 - Indego 1000 Connect (Seite 38 von 456) (Alle Sprachen)

606589

Zoom out

Zoom in

Vorherige Seite

1/456

Nächste Seite

38 | English

F 016 L81 517 | (27.10.15) Bosch Power Tools

lines to and from these zones may not cross but the wire

should be touching. (see figure 8)

Note: Approximately 20 cm of lawn

around the fixed object and around the

edge of the lawn will not be mown.

Fix the wire with the first peg next to the docking station, ten-

sion and fix with pegs at a distance of approx. 50 cm. (see

figure 8)

Continue the loop and bring the wire to the back of the dock-

ing station and inline with the other end of the wire. Fix the

second end of the wire also with the peg. Perimeter wire and

peg should be installed inline. Shorten the wire, cut off insula-

tion carefully and connect the wire to the left hand (black) ter-

minal. (see figure 11)

Clip on the protective cover of the docking station. (see

figure 12)

Note: If extra perimeter wire is required this can be added us-

ing one connector. (see figure 9)

The wire can be extended up to the maximum allowed length

of 450 m.

Note: If verticutting or raking is intended avoid the perimeter

wire.

Install the power supply in a cool, dry environment. Connect it

with the docking station and an indoor mains socket. (see

figure 13)

Check the indicator on the docking station (see figure 14):

–Indicator lights up continuously green, if the output volt-

age of the power supply is available and the perimeter wire

is not interrupted.

–Indicator does not light up when the output voltage of the

power supply is not available.

Initial Setup

Plug the isolator key into the machine and put it into the dock-

ing station for charging. (see figures 15 – 17)

The welcome screen appears and shows following symbols:

The buttons are multifunctional. The meaning depends on the

individual menu function and is explained on the screen.

The buttons next to the arrow symbols or allow to navi-

gate up or down through the menu options. The buttons next

to the arrow symbols or allow to go right or left through

the menu options.

The display will change to the next screen as soon as any op-

tion is selected and confirmed.

Installation

First press the button next to “Language choice”. The “Set

Language” screen appears and shows the following.

Select one of the Language options and confirm with “Save”.

Select the region where the Indego is located and confirm

with “Save”.

This information will be used by the e-compass in the robotic

lawnmower for a better performance of the Indego.

Symbol Meaning

Multifunctional buttons, left

Battery capacity

* Mower connected to GSM network

* Waiting to connect to the GSM network

* Mower connected to server

* Waiting to connect to the server

20-25cm

Indego

Title of Menu/Submenu

Display with dialog screens

Time

Multifunctional buttons, right

* Indego ... Connect

Set Language

English

Deutsch

Dansk

Svenska

Norsk

Suomi

Save

Select Region

Europe – South

Europe – West

Europe – North

Europe – UK

Europe – East

Cancel Save

Symbol Meaning

OBJ_BUCH-1573-008.book Page 38 Tuesday, October 27, 2015 10:35 AM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch 3600 HA2 - Indego 1000 Connect Seite 38

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Bosch 3600 HA2 - Indego 1000 Connect

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info