697454
50
Zoom out
Zoom in
Vorherige Seite
1/170
Nächste Seite
50 en | Settings AMAX panel
2019.08 | 11 | F.01U.309.277 Installation Manual Bosch Security Systems B.V.
03 Basic User
04 Arming User
05 Duress User
06 -15 No Priority
Please refer to Installer code, page 50 for a description of the user permission levels.
User Code in Area
This option has a different function dependant on which user type has been selected above.
For Super User, Basic User, Arming User and Duress User:
For each of these user types any area can be assigned individually. Keyfobs are
automatically assigned to the selected areas as well.
For example: If 01 and 02 is selected in this option, area 01 and 02 is assigned. Keyfobs
are also assigned to area 01 and 02.
For Master User 1 and 2:
For master users all areas are automatically assigned although they are displayed as
unassigned on the keypad. Areas can not be unassigned. Changes in this option only
apply to keyfobs.
For example: If 01 and 02 is selected in this option, all areas are assigned and keyfobs are
assigned to area 01 and 02.
User Macro Authorizing
For each user, up to three recordable macros can be assigned.
Keyfob ID
Keyfobs are designed for arming and disarming the system remotely, trigger a panic alarm, or
for additional control functionality. For each user, one keyfob ID can be assigned
To operate the buttons, press and hold either button for at least one sec in order to use the
desired feature.
The AMAX panel identifies keyfob users by device RFID. AMAX Keypad programming supports
entering RFID automatically for Radion devices.
4 When the keyfob RFID is asked for, press [*] for 3s to toggle between AUTO and
MANUAL mode.
When MANUAL is selected, enter the 9-digit RFID manually.
When AUTO is selected, trigger the RF device and the RFID is entered automatically.
Keyfob Button 3
For the keyfob button 3 the following settings can be selected:
0 – not used
1 – output control
2 – STAY arm
6.2.2 Installer code
The installer code is designed to program the AMAX panel. In addition, the installer code is
used for some code commands.
The default installer code is 1234. The default user code 1 is 2580. The default user code 2 is
2581. These codes should be changed to an individual code.
Notice!
Identical codes are not allowed. User codes are not permitted to be the same as the installer
code.
50

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Bosch AMAX panel 4000 EN wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Bosch AMAX panel 4000 EN

Bosch AMAX panel 4000 EN Kurzanleitung - Deutsch - 76 seiten

Bosch AMAX panel 4000 EN Kurzanleitung - Holländisch - 76 seiten

Bosch AMAX panel 4000 EN Installationsanweisung - Holländisch - 190 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info