Bedienungsanleitung Bosch AQUATAK 10 (Seite 15 von 97) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

1165

Zoom out

Zoom in

Vorherige Seite

1/97

Nächste Seite

English - 3

15 • F016 L70 370 • TMS • 06.09.05

Trigger safety lock

Trigger

Power gun

Extension lance

(only AQUATAK ECO/100/100 PLUS)

Vario-jet-fan nozzle

(only AQUATAK ECO/100/100 PLUS)

High pressure hose

Detergent nozzle and bottle

Roto nozzle (AQUATAK 100 PLUS only)

Mains plug**

Inlet Connector

Main switch

Fan Nozzle (only AQUATAK 10)

Serial Number

**Country specific

Not all of the accessories illustrated or described are

included as standard delivery.

Electrical Safety

Your machine is double insulated for safety and re-

quires no earth connection. The operating voltage is

230 V AC, 50 Hz (for non-EU countries 220 V,

240 V as applicable). Only use approved extension

cables. Contact your Bosch Service Centre for de-

tails.

If you want to use an extension cable when operat-

ing your high pressure washer, only the following ca-

ble dimensions should be used:

1.5 mm

– max length 20 m

2.5 mm

– max length 50 m

Note: If an extension cable is used it must be

earthed and connected through the plug to the earth

cable of your supply network in accordance with pre-

scribed safety regulations.

If in doubt contact a qualified electrician or the near-

est Bosch Service Centre.

WARNING! Inadequate extension cables can be

dangerous. Extension cable, plug and socket

must be of watertight construction and intended

for outdoor use.

Cable connections should be kept dry and off

ground.

It is recommended for increased electrical safety to

use a Residual Current Device (RCD) with a tripping

current of not more than 30 mA. Always check your

RCD every time you use it.

For products

not sold in GB

: WARNING: For

safety, it is essential that the mains plug

attached

to the product is fitted to the power supply cable. The

couplings of connection leads must be protected

against splashes and the coupling sockets on the

leads must be made of rubber or coated with rubber.

Fixing means for the connection leads must be

used.

If the supply cord is damaged, it must be replaced by

a Bosch Service Centre.

Products sold in

only: Your product is fitted with

an approved 13 A (BS 1363/A) electric plug and is

protected by a 13 A fuse (ASTA Approved to

BS 1362).

If the fitted plug is not suitable for your socket out-

lets, it should be cut off and an appropriate plug fit-

ted in its place.

The severed plug must be disposed of to avoid a

possible shock hazard and should never be inserted

into a 13 A socket elsewhere.

Water connection

Screw inlet connector

onto machine water in-

let connection

/ Attach water supply hose (not supplied) to

the mains water supply and machine.

Connecting high pressure water supply hose/

nozzle

Securely screw high pressure hose

onto ma-

chine at connection

Inserting the extension lance

/fan nozzle

into

the power gun

. Depress and turn the extension

lance

/fan nozzle

90° clockwise to lock in place.

Inserting the Jet-fan nozzle

into the extension

tube

and turn the Jet-fan nozzle

clockwise until

it “clicks”, it is now locked in place.

Fan Nozzle (only AQUATAK 10)

The fan nozzle

is a fix fan and has no adjustment.

Vario-jet-fan nozzle (lilac colour coded

–

only

AQUATAK ECO/100/100 PLUS)

Twist the nozzle sleeve to adjust from a pencil to

a fan jet and vice versa.

Operating Controls

For Your Safety

Warning! Switch off, remove plug from mains

before adjusting, cleaning or if cable is cut,

damaged or entangled.

Assembly

Adjustments and using different

nozzles

F016 L70 370 - GB Seite 3 Donnerstag, 29. September 2005 2:57 14

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch AQUATAK 10 Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info