Bedienungsanleitung Bosch AQUATAK 10 (Seite 16 von 97) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

1165

Zoom out

Zoom in

Vorherige Seite

1/97

Nächste Seite

English - 4

16 • F016 L70 370 • TMS • 06.09.05

Detergent nozzle and bottle

Turning the extension lance

/fan nozzle

90°

anti-clockwise. Extract the extension lance

/fan

nozzle

Inserting the detergent-nozzle

into the power

gun

. Depress and turn the detergent-nozzle

90°

clockwise to lock in place.

Roto nozzle

(red colour coded

–

AQUATAK 100 PLUS only)

Turn the Jet-fan nozzle

anti-clockwise to ex-

tract it from the extension lance

Inserting the Roto nozzle

into the extension

lance

and turn the Roto nozzle clockwise until it

“clicks”, it is now locked in place.

Starting

Connect the product to the mains supply ensuring

that the mains switch is in the ( ) position.

Open water tap.

Press the safety lock

to release the trigger

Fully press the trigger

until there is a constant flow

of water to clear the air from the machine and water

supply hose. Release trigger

. Press the trigger

safety lock.

Press button ( ) on main switch

Point the power gun

downwards. Press the trigger

safety lock to release the trigger

. Fully press the

trigger

Stopping

Release trigger

. Press the trigger safety lock. The

power gun is now locked and can not be operated

accidentally.

Press button ( ) on the main switch

Close water tap. Unplug the machine from the elec-

tric supply.

Press the trigger safety lock

to release the trig-

ger 2. Fully press the trigger 2 until there is no more

water pressure in the machine. Release trigger 2.

Press the trigger safety lock 1.

Disconnect water supply hose from machine and

water supply.

General

Ensure that the machine is on level ground.

Do not overreach with the high pressure hose or

move the pressure washer by pulling the hose, this

could cause the machine to become unstable and

fall over.

Do not kink or drive a motor vehicle over the high

pressure hose. Do not expose the high pressure

hose to sharp edges or corners.

Never use the roto nozzle to clean motor vehicles.

Operating with Detergents

Only use Bosch approved detergents. Unsuita-

ble detergents may damage the unit and the ob-

ject being cleaned.

Attach the detergent-nozzle to the spray gun.

Fill the detergent bottle with suitable detergent and

screw the bottle back on the detergent-nozzle.

We recommend that you use detergent sparingly for

the sake of the environment. Observe the re-

commended dilution on the detergent label.

By offering you an individualised range of cleaning

and preserving agents, Bosch guarantees trouble-

free operation of the unit.

Recommended cleaning method

Step 1: Loosening dirt

Spray on detergent sparingly and allow to react for a

short time.

Step 2: Removing dirt

Spray off the loosened dirt with the high-pressure

spray using a jet fan.

Note: When cleaning a vertical surface spray off dirt/

detergent from the bottom and work in an upwards

direction. Rinse from the top and work downwards.

Starting and Stopping

Advice using pressure washer

F016 L70 370 - GB Seite 4 Donnerstag, 29. September 2005 2:57 14

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch AQUATAK 10 Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info