Bedienungsanleitung Bosch Aquatak 160 Pro X (Seite 13 von 98) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

79210

Zoom out

Zoom in

Vorherige Seite

1/98

Nächste Seite

English - 1

13 • F016 L70 375 • TMS • 21.10.05

Before start-up please read these instructions!

Before using the machine please read the op-

erating instructions for your unit and comply in

particular with these safety instructions.

Please keep the instructions safe for later use.

The warning and information signs attached to the unit

provide important information for safe operation.

Apart from the information in the operating instructions

comply with the general safety regulations and regula-

tions for the prevention of accidents.

Never direct the water jet at people, animals,

the unit or electric components.

Warning: High pressure jets can be dangerous if subject to

misuse.

Power Supply

■ The voltage indicated on the rating plate must corre-

spond to the voltage of the power source.

■ Class 1 units may only be connected to properly earthed

power sources.

■ We recommend that this equipment is only connected

into a socket which is protected by a circuit-breaker that

would be actuated by a 30 mA residual current.

■ If an extension cord is used, the plug and socket must be

of a water tight construction.

Warning: Inadequate extension cords can be danger-

ous.

■ Never touch the mains plug with wet hands.

■ Do not run over, crush or pull the power supply cable or

extension lead, otherwise it may be damaged. Protect

the cable from heat, oil and sharp edges.

■ The extension lead must have a cross section in accord-

ance with the operating instructions and be protected

against splashed water. The connection must not be in

water.

Water connection

■ Comply with the regulations of your water supply com-

pany.

■ All connecting hoses must have properly sealed joints.

■ The high-pressure hose must not be damaged (danger

of bursting). A damaged high-pressure hose must be re-

placed immediately. Only use hoses and connections

recommended by the manufacturer.

Application

■ Before use, check that the unit and operating equipment

are in perfect condition and are safe to operate. Do not

use the unit if it is not in perfect condition.

■ Never draw in solvent-containing liquids, undiluted acids

or solvents! This includes petrol, paint thinners heating

oil. The sprayed vapour is highly flammable, explosive

and toxic; also acetone, undiluted acids and solvents as

these corrode the materials used on the unit.

■ The appropriate safety regulations must be observed

when using the unit in dangerous area (e.g. petrol sta-

tions). It is forbidden to operate the unit in potentially ex-

plosive locations.

■ The unit must be placed in on solid base.

■ Only use detergents recommended by the manufacturer

and comply with the application, disposal and warning in-

structions of the detergent manufacturers.

■ All current-conducting components in the working area

must be protected against splashed water.

■ The gun trigger must not be jammed in the “ON” position

during operation.

■ Suitable protective clothing must be worn if necessary to

protect against splashing from some parts.

■ Vehicle tyres/tyre valves may only be cleaned from a

minimum distance of 30 cm, otherwise the vehicle tyre/

tyre valve could be damaged by the high-pressure jet.

The first indication of this is a discoloration of the tyre.

Damaged vehicle tyres/tyre valves can be deadly dan-

gerous.

■ Materials containing asbestos and other materials which

contain substances which are hazardous to your health

must not be sprayed.

■ Only use detergents which have been approved by the

manufacturer of the unit.

■ Detergents must not be used undiluted. The products

are safe to use as they contain no acids, alkalis or sub-

stances which are detrimental to the environment. We

recommend that the detergents are kept out of the reach

of children. If detergent comes into contact with the eyes

wash immediately with plenty of water and if swallowed

contact a doctor immediately.

Operation

■ The operator must use the unit in accordance with the

regulations. He/she must take local conditions into ac-

count and be aware of other people, especially children,

when operating the unit.

■ Do not use the appliance within the range of persons, un-

less they wear protective clothing.

■ Do not direct the jet against yourself or others in order to

clean clothes or footwear.

■ The unit may only be used by authorised persons who

have received training or have demonstrated their ability

to operate the unit. The unit must not be operated by chil-

dren or juveniles (danger of accidents due to incorrect

use of the unit).

■ The unit must never be left unsupervised while the motor

is running.

■ The water jet from the high-pressure nozzle produces a

recoil on the gun. You should therefore hold the gun and

spray lance firmly.

Transport

■ Switch off the motor and secure the unit before transport-

ing.

Maintenance

■ Remove the plug from the socket:

– whenever you leave the unit unattended for any period

– checking, cleaning or working on the unit

■ Repairs may only be carried out by authorised BOSCH

Service Centres.

Accessories and spare parts

■ Only use accessories and spare parts which have been

approved by BOSCH. Original accessories and spare

parts guarantee that the unit can be operated safely and

without any breakdowns.

Safety Notes

F016 L70 375 - GB Seite 1 Montag, 14. November 2005 1:15 13

Bosch Aquatak 160 Pro X Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Bosch Aquatak 160 Pro X

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info