Bedienungsanleitung Bosch Aquatak 160 Pro X (Seite 16 von 98) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

79210

Zoom out

Zoom in

Vorherige Seite

1/98

Nächste Seite

English - 4

16 • F016 L70 375 • TMS • 21.10.05

AQUATAK 160 PRO X

Twist the nozzle sleeve to adjust from a pencil to

a fan jet and vice versa.

To apply the detergent move the nozzle from

high pressure mode to low pressure mode by pulling

the nozzle forward.

To adjust the spray patten twist the nozzle.

Also refer to Advice on using pressure washer re-

garding the detergent suction rate.

Roto power lance

Turn the vario-jet/fan power lance 9 90° anti-

clockwise. Extract the vario-jet/fan power lance.

(AQUATAK 150 PRO/150 PRO X)

Unscrew the vario jet-fan power lance 9 from the

power gun 7. (AQUATAK 160 PRO X)

Insert the roto-power lance 14 into the power

gun 7. Depress and turn the roto-power lance 90°

clockwise to lock in place. (AQUATAK 150 PRO/

150 PRO X)

Screw the roto-power lance 14 into the power gun 7.

(AQUATAK 160 PRO X)

Starting

Connect the product to the mains supply ensuring

that the mains switch is in the ( ) position.

Open water tap.

Press the safety lock 1 to release the trigger 2.

Fully press the trigger 2 until there is a constant flow

of water to clear the air from the machine and water

supply hose. Release trigger 2. Press the trigger

safety lock.

Turn on main switch 10.

Point the power gun 7 downwards. Press the trigger

safety lock to release the trigger 2. Fully press the

trigger 2.

Stopping

Release trigger 2. Press the trigger safety lock. The

power gun is now locked and cannot be operated ac-

cidentally.

Turn off the main switch 10.

Close water tap. Unplug the machine from the elec-

tric supply.

Press the trigger safety lock 1 to release the trig-

ger 2. Fully press the trigger 2 until there is no more

water pressure in the machine. Release trigger 2.

Press the trigger safety lock 1.

Disconnect water supply hose from machine and

water supply.

General

Ensure that the machine is on level ground.

Do not overreach with the high pressure hose or

move the pressure washer by pulling the hose, this

could cause the machine to become unstable and

fall over.

Do not kink or drive a motor vehicle over the high

pressure hose. Do not expose the high pressure

hose to sharp edges or corners.

Never use the roto nozzle to clean motor vehicles.

Operating with Detergents

Only use Bosch approved detergents. Unsuita-

ble detergents may damage the unit and the ob-

ject being cleaned.

/ Fill the detergent tank 6 with detergent, di-

lute as recommended. The tank(s) can be removed

to aid filling and emptying.

/ To spray detergent move vario-jet-fan power

lance to low pressure mode.

We recommend that you use detergent sparingly for

the sake of the environment. Observe the re-

commended dilution on the detergent label.

By offering you an individualised range of cleaning

and preserving agents, Bosch guarantees trouble-

free operation of the unit.

Only Aquatak 150 PRO/160 PRO X

The product is fitted with one detergent tank. The

detergent adjustment knob 11 is used to increase/

decrease detergent flow.

Only Aquatak 150 PRO X

The product is fitted with two detergent tanks. The

detergent adjustment knob 11 is used to switch the

suction between detergent tanks and increase/de-

crease detergent flow.

Recommended cleaning method

Step 1: Loosening dirt

Spray on detergent sparingly and allow to react for a

short time.

Step 2: Removing dirt

Spray off the loosened dirt with the high-pressure

spray.

Note: When cleaning a vertical surface spray off dirt/

detergent from the bottom and work in an upwards

direction. Rinse from the top and work downwards.

Starting and Stopping

Advice using pressure washer

F016 L70 375 - GB Seite 4 Montag, 14. November 2005 1:15 13

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch Aquatak 160 Pro X Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Bosch Aquatak 160 Pro X

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info