Bedienungsanleitung Bosch AXT 22 D (Seite 17 von 258) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

591611

Zoom out

Zoom in

Vorherige Seite

1/258

Nächste Seite

English | 17

Bosch Power Tools F 016 L81 145 | (28.8.14)

Never pick up or carry the machine

while the motor is running.

Switch off, allow the cutter to stop

and remove the plug from the mains

supply whenever you leave the work

area.

Do not tilt the machine while it is run-

ning.

Do not expose the machine to rain.

Only store the machine in a dry place.

When using an aggregator then it

needs to be an Automatic Voltage

Regulation (AVR) version avoiding

damages caused by overvoltage

spikes.

Maintenance and Storage

When the machine is stopped for ser-

vicing, inspection, or storage, or to

change an accessory, switch off and

remove the plug from the mains sup-

ply and allow the machine to cool.

Make sure that all moving parts have

come to a complete stop before mak-

ing any inspections, adjustments,

etc.

Maintain the machine with care and

keep it clean.

Examine the machine and replace

worn or damaged parts for safety.

Ensure replacement parts fitted are

Bosch approved.

If an extension cord is used it shall not

be of lighter grade than the supply

cord already fitted to the machine.

Check the supply and any extension

cord regularly for damage or signs of

ageing. Do not use the machine, if the

cords are damaged.

When servicing the cutter be aware

that, even though the motor will not

start due to the interlock feature of

the guard, the cutter can still be

moved if the motor is turned by hand.

Never attempt to override the inter-

lock feature of the guard.

Product Description and Specifica-

tions

Read all safety warnings and all instructions.

Failure to follow the warnings and instructions

may result in electric shock, fire and/or serious in-

jury.

Intended Use

The product is intended for cutting of fibrous and woody gar-

den waste for composting.

The collection box is intended for collecting the material cut,

and for storing the chute assembly and prodder.

The collection box should not be used for other purposes.

Delivery Scope

Carefully remove the garden product from its packaging and

check if the following parts are complete:

– Quiet-shredder

– Chute assembly

–Prodder

– Collection box

– Operating instructions

When parts are missing or damaged, please contact your

dealer.

When fully assembled the garden product weighs approxi-

mately 30,5–31,3 kg. If necessary, obtain assistance to re-

move from packaging.

Product Features

The numbering of the garden product features refers to the il-

lustration of the garden product on the graphics page.

1 Undercarriage

2 Power plug**

3 Ventilation slots

4 Green button

5 Red STOP button

6 Yellow button

7 Prodder

8 Chute assembly

9 Clamping knob

10 Adjustment knob

OBJ_BUCH-895-004.book Page 17 Thursday, August 28, 2014 9:05 AM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch AXT 22 D Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info