Bedienungsanleitung Bosch BGS41SIL66 (Seite 49 von 126) (Alle Sprachen)

700890

Zoom out

Zoom in

Vorherige Seite

1/126

Nächste Seite

* Dependent on model

Vacuuming with accessories

Figure

12*

Attach the nozzles to the suction pipe or handle as re-

quired:

a) Hard-ﬂoor nozzle*

- with clip-in edge-cleaning bristles:

of hard ﬂoor coverings (tiles, parquet, etc.)

- without edge-cleaning bristles:

For cleaning dirt in gaps and cracks



The edge-cleaning bristles can be removed by

pushing the two catches in the direction of the ar-

rows.

b) Crevice nozzle* for vacuuming crevices and corners,

etc.

c) Upholstery nozzle* for vacuuming upholstered furni-

ture, curtains, etc.

After each use, reinsert the combination nozzle into

the accessories holder.

d) Furniture brush

For cleaning window frames, cabinets, mouldings,

etc.

e) Mattress nozzle*

For cleaning mattresses, upholstery, etc.

Drill dust nozzle

Figure

13*



Fasten the drill dust nozzle onto the handle and po-

sition it on the wall so that the drill hole opening on

the nozzle is placed directly over where the hole is

to be drilled.



Set the appliance to the lowest power level and then

switch it on.



The drill dust nozzle is held in the required position

by suction. Depending on the condition of the wall to

be drilled, you may need to adjust to a higher power

setting to ensure that the drill dust nozzle remains

in place.

During drilling, the ﬁne dust is automatically vacu-

umed up.

Figure

You can use the parking aid on the side of the appliance

if you want to stop vacuuming for a short time.



After switching off the appliance, slide the hook on

the ﬂoor nozzle into the parking aid.

Figure

When vacuuming stairs, the appliance must be positi-

oned at the bottom of the stairs. If it does not reach

far enough, the appliance can also be carried using the

carrying handle.After vacuuming

Figure

a) Switch off the appliance.



Unplug the mains plug.

b) Brieﬂy pull on the mains cable and then let go. (The

mains cable retracts automatically.)

Figure

17*



Release the telescopic tube by moving the sliding

switch or adjusting sleeve in the direction of the ar-

row, and slide one tube into the other.

Figure

To store/transport the appliance, you can use the sto-

rage aid on the underside of the appliance.

a) Prop up the appliance on the hose or dust container

handle.

b) Slide the hook on the ﬂoor nozzle into the storage

aid.



In order to save space and to facilitate transport,

wind the suction hose around the appliance and the

telescopic tube.

c) The appliance can also be transported using the

handle on the dust container.

Disassembly

Figure



To remove the suction hose, press the two catches

together and pull out the hose from the appliance's

air intake opening.

Figure

20*

a) Telescopic tube without accessory connection:

To release the connection, turn the handle slightly

and pull it out of the telescopic tool.

b) Telescopic tube with accessory connection:

To release the connection, press the locking collar

on the telescopic tube and and pull out the handle.

Figure

21*

a) Nozzle without accessory connection:

To release the connection, turn the telescopic tube

slightly and pull it out of the ﬂoor nozzle.

b) Nozzle with accessory connection:

To release the connection, press the locking collar

and pull the telescopic tube out of the ﬂoor nozzle.

Cleaning and maintenance

Emptying the dust container

Figure

In order to achieve the best possible vacuuming results,

the dust container should be emptied after every use

or, at the latest, when dust in the dust container has

reached the marking at any point.

The display lights up red (SmartSensor Control) if the

dust container has to be emptied.

Figure

Caution

The dust container can only be removed when the

appliance is in a horizontal position. Therefore,

place the appliance on the ﬂoor to unlock the re-

lease button.

Figure

a) Hold the dust container at the handle and press on

the release button to remove it from the appliance.

b) Release the lid from the dust container by pulling on

the tab, and open the dust container.

c) Remove the lid from the dust container and empty

the dust container.

d) Check the ﬂuff ﬁlter and rinse it under running wa-

ter, if necessary. Allow to dry before putting it back

in the dust container. Close and lock the lid.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch BGS41SIL66 Seite 49

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info