Bedienungsanleitung Bosch BGS41SIL66 (Seite 50 von 126) (Alle Sprachen)

700890

Zoom out

Zoom in

Vorherige Seite

1/126

Nächste Seite

* Dependent on model

e) Put the lid back on the dust container so that it

clicks into place.

f) Insert the dust container into the appliance.

Maintaining the dust-collection system

Figure

24*

Your appliance is equipped with a SmartSensor Con-

trol indicator. This function constantly monitors whe-

ther your vacuum cleaner is working at its optimum

power level.

The indicator lights up blue when the appliance is wor-

king optimally. If the indicator turns red and ﬂashes,

the plate ﬁlter needs to be cleaned. The appliance is

automatically adjusted back to the lowest power set-

ting.

Cleaning the ﬁlter in the dust container

Switch off the appliance.

Figure



Remove the dust container from the appliance. Figure

a) Open the bottom plate of the dust container by

pulling on the lower catch.

b) Fold out the ﬁlter cartridge with ﬁlter foam.

c) Remove the ﬁlter foam from the bottom plate of the

dust container.

d) Tapping out the ﬁlter foam is all that is required to be

able to stop the suction process.

e) Then clean the ﬁlter foam under running water.

f) Alternatively, the ﬁlter can be cleaned in a wa-

shing machine at max. 30 °C using a gent-

le programme and the lowest spin speed.

TIP: To protect the ﬁlter, place it in a laundry bag.

g) Allow the ﬁlter foam to dry completely for at least 24

hours and then place both ﬁlters back in the bottom

plate of the dust container.

h) Close and lock the bottom plate.

i) Insert the dust container into the appliance.

Maintaining the exhaust ﬁlter

The exhaust ﬁlter is designed so that it does not need

to be replaced, provided the appliance is used as inten-

ded in the household.

To ensure that the vacuum cleaner is working at its op-

timum power level, the exhaust ﬁlter should be washed

after one year. The ﬁltering action of the ﬁlter remains

intact, even if the ﬁlter surface becomes discoloured.

Figure

26*

a) Open the rear ﬂap by pressing on the release button.

b) Pull the locking tab in the direction of the arrow to

release the (H)EPA ﬁlter and remove it from the ap-

pliance.

c) Remove the ﬁlter foam from the rear ﬂap.

d) Tap out the ﬁlter unit and ﬁlter foam and rinse them

under running water.

Alternatively, the unit can be cleaned in a wa-

shing machine at max. 30 °C using a gent-

le programme and the lowest spin speed.

TIP: To protect other laundry items, put the ﬁlter unit

into a laundry bag.

e) Once the (H)EPA* ﬁlter has dried completely (at

least 24 hours), insert it back into the appliance and

lock it in place.

f) Insert the ﬁlter foam and close the rear ﬂap.

After vacuuming ﬁne dust particles (e.g. gypsum, ce-

ment, etc.), clean the motor protection ﬁlter by tapping

it out or, if necessary, replace the motor protection ﬁl-

ter and exhaust ﬁlter.

Cleaning instructions

Always switch off the vacuum cleaner and unplug the

mains plug before cleaning the vacuum cleaner. The va-

cuum cleaner and plastic accessories can be cleaned

with standard plastic cleaner.

Attention:

Do not use abrasive cleaning products, glass clea-

ner or multi-purpose cleaning products. Never im-

merse the vacuum cleaner in water.

Subject to technical modiﬁcations.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch BGS41SIL66 Seite 50

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info