809324
8
Zoom out
Zoom in
Vorherige Seite
1/28
Nächste Seite
Operation
Compress 7000 AWM/AWMS 5-17 – 6721830635 (2021/02)
8
3.2.3 Set operating mode
Activate automatic mode (with time program)
If manual operation is active:
Press the menu key.
Press the selector to open the Heating or Heating/Cooling menu.
Press the selector to open the Op. mode menu.
Highlight the desired heating circuit and press the selector.
▶Choose auto and press the selector.
Press and hold the d key to return to the standard display.
A pop-up window is displayed and the time program is activated. The
currently valid temperature flashes.
Activating optimised operation (without time program)
If automatic mode is active:
Press the menu key.
Press the selector to open the Heating or Heating/Cooling menu.
Press the selector to open the Op. mode menu.
Highlight the desired heating circuit and press the selector.
▶Choose Optimise and press the selector.
Press and hold the d key to return to the standard display.
A pop-up window is displayed and the required room temperature is
shown.
3.2.4 Changing the room temperature temporarily
Retaining automatic mode
Turn and press the selector to set the required room temperature.
The corresponding time slot is displayed differently to the other time
slots.
The change applies until the next switching time in the active time
program is reached.
Cancelling the temperature change:
Turn and press the selector to set the value stored in the time
program.
3.2.5 Changing the room temperature permanently
Optimised operation (without time program)
Turn and press the selector to set the temperature.
-or-
▶Open the Heating or Heating/Cooling > Temperature settings >
Optimised operation menu.
Select the desired temperature and confirm or select Heating off
and confirm.
Automatic mode
▶Open the Heating or Heating/Cooling > Temperature settings >
Heating, Setback or Cooling menu.
Set the desired temperatures for each mode and confirm, or select
and confirm for the Heating off setback mode.
Assign the operating modes to the required time slots via the time
program.
3.2.6 Adapting the heating system settings using the time
program (automatic mode)
Open the menu for adapting a time program for the heating system
Open the main menu.
▶Open the menu Heating or Heating/Cooling > Time program > My
time program 1 or 2.
6 720 812 775-03.1O
6 720 812 775-04.1O
0010021418-001
6 720 812 775-06.1O
6 720 811 136-07.1O
0010008191-001
8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Bosch Compress 7000 AWM wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info