Bedienungsanleitung Bosch Compress 7000 AWM (Seite 15 von 28) (Englisch)

809324

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

Operation

Compress 7000 AWM/AWMS 5-17 – 6721830635 (2021/02)

3.3.3 Settings for the venting function

Menu: Ventilation

Table 14 Ventilation settings

3.3.4 Setting up a holiday program

Menu: Holiday

CAUTION

Risk of system damage!

▶ Before a prolonged period of absence, only change the settings

under Holiday.

▶ After a long absence, check the operating pressure of the heating

system and check the pressure gauge of the solar system if

applicable.

▶ Do not switch off the solar system during long absences.

Cooling mode will not be activated during a holiday program.

Menu: Holiday 1, Holiday 2, Holiday 3, Holiday 4 and Holiday 5

Table 15 Settings for holiday programs

3.3.5 Settings for other systems or devices

If other specific systems or devices are installed in the system, additional

menu items will be available. Depending on which system or device is

being used and the associated assemblies or components, various

settings can be made. Observe the additional information on the settings

and functions in the technical documentation for the relevant system or

device.

Settings for a swimming pool

Menu: Pool

Table 16 Settings for pool heating

Menu item Description

Op. mode [Select vent. operating mode.]

• [Sleep]

• [High vent. rate] (high ventilation rate)

• [Auto (time program)]

• [Demand-ctrlled] (demand controlled)

• [Ex.air bypass] (exhaust air bypass)

• [Party vent.] (party ventilation)

• [Firepl.] (fireplace)

• [Fan speed 1 ... 4]

• [Ventil. switched off] (ventilation off)

Time program [Enter vent. time program.]

Reset time prog. [Reset ventilation time program.]

Humidity [Setting the desired humidity level]:

•[Dry]

•[Normal]

•[Moist]

Air quality [Setting the desired air quality level:

•[Adequate]

•[Normal]

• [High]

Bypass [Bypass] for more opening hours:

•[Open]

•[Close.]

Supply air temp.

control

Set the [Supply air temp.]:

• [Heating]

• [HtgCool] (heating and cooling)

• [Cooling]

•[Off]

Supply air temp.

control (Electric)

Set the [Supply air temp.]:

• [Heating]

•[Off]

Reheat supp.air

temp.

[Set the desired supply air temp. of reh. bank.]

10 ... 22 ... 30 °C

Filter timer [Set the time in months until the next filter change.]

1 ... 6 ... 12 Months

Confirm filter

change

The filters in the ventilation unit must be changed.

Please confirm the filter change.

Rename ventil.

zone

The names of the ventilation zones can be changed

in the same way as the names of the heating

circuits. This helps in choosing the right ventilation

zone.

Menu item Description

Holiday period Set the start and end date of the absence during

holiday: the holiday program starts at the set start

time at 00:00 o'clock. The holiday program ends at

the set end time at 24:00 o'clock.

Selection of htg

circ./DHW

The holiday program is applied to the sections of the

system highlighted here. Only the heating circuits

and DHW systems actually installed in the system

are available for selection.

Heating Control of the room temperature for the selected

heating circuits during the holiday period:

• Any [Constant temperature] can be set for the

selected heating circuits throughout the entire

holiday period.

• The [Off ]setting deactivates the heating system

completely for the selected heating circuits.

DHW DHW settings for the selected DHW systems during

the holiday period.

• If [Off] is set, no DHW at all will be available

during the holiday period.

• If [Off + therm. disinfection on] is set, DHW

heating is deactivated but thermal disinfection is

still carried out as normal either once a week or

once a day.

Note: If the holiday is spent at home, the DHW

systems must not be selected under [Selection of

htg circ./DHW] to ensure DHW remains available.

Delete Delete all settings for the selected holiday program

Menu item Description

Switch on pool

heating

This setting enables the pool heating when it is

activated.

Pool

temperature

The water in the pool is heated to this temperature.

Allow add. heater

for pool

This setting allows the auxiliary heater to supply

heating for the pool if the heat pump cannot reach

the set temperature.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch Compress 7000 AWM Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info