Bedienungsanleitung Bosch EasyGrassCut 18V (Seite 25 von 440) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch)

776839

Zoom out

Zoom in

Vorherige Seite

1/440

Nächste Seite

English | 25

Charger AL 1810 CV AL 1820 CV AL 1830 CV AL 1880 CV

Protection class / II / II / II / II

Noise/Vibration Information

3 600 HC1 A.. 3 600 HC1 C..

Noise emission values determined according to EN 62841-4-4.

Typically the A-weighted noise levels of the product are:

– Sound pressure level dB(A) 72 74

– Uncertainty K dB = 2.5 = 2.5

– Sound power level dB(A) 80 82

– Uncertainty K dB = 1.0 = 1.0

Vibration total values ah (triax vector sum) and uncertainty K determined according to EN 62841-4-4

– Vibration emission value ahm/s2< 2.5 < 2.5

– Uncertainty K m/s2= 1.5 = 1.5

Mounting and Operation

Action Figure Page

Product features A431

Delivery scope B432

Removing the transport safety C432

Connecting the shaft D433

Adjusting the handle E433

Mounting the protection guard F434

Battery charging and inserting G435

Switching On and Off H435

Switching from lawn trimming/

edge cutting I436

Removing the line spool J437

Winding line on spool K437

Mounting the line spool L438

Line feeding M438

Maintenance, Cleaning and Stor-

age N439

Accessories O440

Assembly

uCaution: Switch the garden tool off and pull the mains

plug before performing any maintenance.

Connect shaft (see figures C and D)

Note: A connected shaft can no longer be dismounted.

Remove the transport safety (9).

Connect the individual parts of the shaft until they can be

heard to engage.

Mounting and adjusting the handle (see figure E)

The handle (1) can be set to different positions. To change

the adjustment, press buttons (7) and move the handle to

the desired position. Release the buttons (7) again so that

the handle can engage.

Mounting the protection guard (see figure F)

Before mounting the protective guard, pull the plant-protec-

tion frame from the delivery position to the storage position.

Position the protection guard (8) on the trimmer head and

fasten it with the provided screw.

Do not disassemble guard once connected.

Then, pull the plant-protection frame to the working posi-

tion.

Switching on

uCaution: Switch garden tool off and remove battery

from machine before adjusting or cleaning.

uThe cutting line continues to rotate for a few seconds

after the trimmer is switched off. Allow the motor/cut-

ting line to stop rotating before switching on again.

uDo not briefly switch off and on again several times in

a row.

uOnly use Bosch approved cutting elements. Cutting

performance will vary with different cutting elements.

Charging the Battery

The battery is equipped with temperature monitoring that al-

lows charging only in the temperature range between 0 °C

and 35 °C. In this manner, a high battery service life is

achieved.

Note: The battery is supplied partially charged. To ensure

full battery capacity, completely charge the battery in the

battery charger before using for the first time.

Bosch Power Tools F 016 L94 299 | (22.07.2021)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch EasyGrassCut 18V Seite 25

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Bosch EasyGrassCut 18V

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info