Bedienungsanleitung Bosch EasyGrassCut 18V (Seite 26 von 440) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch)

776839

Zoom out

Zoom in

Vorherige Seite

1/440

Nächste Seite

26 | English

The lithium-ion battery can be charged at any time without

reducing its service life. Interrupting the charging procedure

does not cause damage to the battery.

The “Electronic Cell Protection (ECP)” protects the lithium-

ion battery against deep discharging. When the battery is

empty, the product is switched off by means of a protective

circuit: The product no longer operates.

Do not continue to press the On/Off switch after an auto-

matic shut-off of the product. The battery could become

damaged.

Observe the notes for disposal of the battery.

Inserting/Removing the Battery (see figure G)

Note: Using unsuitable batteries can lead to malfunctions or

damage the machine.

Insert the charged battery (6). Ensure the battery is inserted

correctly.

To remove the battery (6) from the machine, press the bat-

tery unlocking button (5) and pull the battery out.

Charging Procedure

The charging procedure starts as soon as the mains plug of

the charger is plugged into a socket outlet and the battery

(6) is inserted onto the charger (10).

Due to the intelligent charging method, the charging condi-

tion of the battery is automatically detected and the battery

is charged with the optimum charging current, depending on

battery temperature and voltage.

This gives longer life to the battery and always leaves it fully

charged when kept in the charger for storage.

Meaning of the Indication Elements

(AL1810CV)

Flashing battery charge indicator

The charging process is indicated by the flash-

ing of the battery charge indicator .

Solid light on battery charge indicator

A solid light on the battery charge indicator

signals that the battery is fully charged or that

the temperature of the battery is not within the

permitted charging temperature range, and

can therefore not be charged. The battery is charged as soon

as the allowable charging temperature range is reached.

When the battery is not inserted, a solid light on the battery

charge indicator signals that the mains plug is inserted in the

plug socket and that the charger is ready for operation.

Meaning of the Indication Elements

(AL1830CV)

(Fast) Flashing of the Green Battery Charge Indicator

The rapid-charging procedure is indicated by

fast flashing of the green battery charge in-

dicator .

Note: The rapid-charging procedure is only possible when

the battery temperature is within the allowable charging

temperature range, see section “Technical Data”.

(Slow) Flashing of the Green Battery Charge Indicator

When the charging condition of the battery is

80%, the green battery charge indicator

flashes slowly.

The battery can be removed for immediate use.

Continuous Lighting of the Green Battery Charge

Indicator

Full

Continuous lighting of the green battery

charge indicator indicates that the battery is

fully charged.

When the battery is not inserted, continuous lighting of the

battery charge indicator indicates that the mains plug is in-

serted in the socket outlet and that the battery charger is

ready for operation.

Continuous Lighting of the Red Battery Charge Indicator

Continuous lighting of the red battery charge

indicator indicates that the temperature of the

battery is not within the allowable charging temperature

range, see section “Technical Data”. As soon as the allowable

charging temperature range is reached, the battery charger

automatically switches to rapid charging.

Flashing Red Battery Charge Indicator

A flashing red battery charge indicator indic-

ates a different malfunction of the charging

procedure, see section “Troubleshooting – Causes and Cor-

rective Measures”.

Operation

Switching On and Off (see figure H)

To switch on, firstly press the lock-off button (3). Then

press the On/Off switch (4) and keep it pressed.

To switch off, release the On/Off switch (4).

Lawn Trimming/Edge Cutting (see figure I)

Turn the handle against the shaft by 180° to position the

trimmer head either for lawn trimming or edge cutting. Re-

lease button (2) so that the turning mechanism engages.

Now, turn the complete machine to the working position.

Lawn trimming

Move the trimmer left and right, keeping it well away from

the body. Cut higher grass in steps.

Edge cutting

Guide the trimmer along the edge of the lawn. Avoid contact

with solid surfaces or walls to prevent rapid wear of the cut-

ting line.

Cutting around trees and bushes

Carefully cut around trees and bushes so that they do not

come into contact with the cutting line. Plants can die if you

damage the bark.

F 016 L94 299 | (22.07.2021) Bosch Power Tools

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch EasyGrassCut 18V Seite 26

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Bosch EasyGrassCut 18V

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info