Bedienungsanleitung Bosch EasyHammer 12V (Seite 16 von 93) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Türkisch, Schwedisch, Norwegisch)

766855

Zoom out

Zoom in

Vorherige Seite

1/93

Nächste Seite

16 | English

Setting the Operating Mode

You can set the required operating mode using the mode se-

lector switch (4). To do this, set the switch to the relevant

operating mode.

Symbol Operating mode

R = anticlockwise rotation

Drilling/Screwdriving

Hammer drilling

Switching On and Off

– To switch on the power tool, press the on/off switch (5).

The worklight (10) lights up when the on/off switch (5) is

lightly or fully pressed, allowing the work area to be illumin-

ated in poor lighting conditions.

– To switch off the power tool, release the on/off switch

(5).

For low temperatures, the power tool reaches the full ham-

mer/impact capacity only after a certain time.

Adjusting the Speed/Impact Rate

– Adjust the speed/impact rate of the power tool when it is

on by pressing in the on/off switch(5) to varying extents.

Applying light pressure to the on/off switch(5) results in a

low rotational speed/impact rate. Applying increasing pres-

sure to the switch increases the speed/impact rate.

Temperature-dependent overload protection

In normal conditions of use, the power tool cannot be over-

loaded. If the power tool is overloaded or the permitted bat-

tery temperature is exceeded, the electronics of the power

tool will switch off until the temperature returns to within the

optimum operating temperature range.

Practical Advice

uOnly apply the power tool to the screw/nut when the

tool is switched off. Rotating tool inserts can slip off.

Maintenance and Service

Maintenance and Cleaning

uTo ensure safe and efficient operation, always keep

the power tool and the ventilation slots clean.

If the battery is no longer working, please contact an author-

ised after-sales service agent for Bosch power tools.

In order to avoid safety hazards, if the power supply cord

needs to be replaced, this must be done by Bosch or by an

after-sales service centre that is authorised to repair Bosch

power tools.

uReplace a damaged dust protection cap immediately.

It is recommended that you have use an after-sales

service for this.

After-Sales Service and Application Service

Our after-sales service responds to your questions concern-

ing maintenance and repair of your product as well as spare

parts. You can find explosion drawings and information on

spare parts at: www.bosch-pt.com

The Bosch product use advice team will be happy to help you

with any questions about our products and their accessor-

ies.

In all correspondence and spare parts orders, please always

include the 10‑digit article number given on the nameplate

of the product.

Great Britain

Robert Bosch Ltd. (B.S.C.)

P.O. Box 98

Broadwater Park

North Orbital Road

Denham Uxbridge

UB 9 5HJ

At www.bosch-pt.co.uk you can order spare parts or arrange

the collection of a product in need of servicing or repair.

Tel. Service: (0344) 7360109

E-Mail: boschservicecentre@bosch.com

You can find further service addresses at:

www.bosch-pt.com/serviceaddresses

Transport

The contained lithium-ion batteries are subject to the Dan-

gerous Goods Legislation requirements. The batteries are

suitable for road-transport by the user without further re-

strictions.

When shipping by third parties (e.g.: by air transport or for-

warding agency), special requirements on packaging and la-

belling must be observed. For preparation of the item being

shipped, consulting an expert for hazardous material is re-

quired.

Disposal

Power tools, rechargeable batteries, accessor-

ies and packaging should be sorted for environ-

mental-friendly recycling.

Do not dispose of power tools and batteries/re-

chargeable batteries into household waste!

Only for EU countries:

According to the Directive 2012/19/EU, power tools that

are no longer usable, and according to the Directive

2006/66/EC, defective or used battery packs/batteries,

must be collected separately and disposed of in an environ-

mentally correct manner.

Battery packs/batteries:

Li-ion:

Please observe the notes in the section on transport (see

"Transport", page16).

1 609 92A 4MK | (28.01.2021) Bosch Power Tools

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch EasyHammer 12V Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info