Bedienungsanleitung Bosch EasyHedgeCut 18-45 (Seite 17 von 286) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

708230

Zoom out

Zoom in

Vorherige Seite

1/286

Nächste Seite

English | 17

Charging Procedure

The charging procedure starts as soon as the mains plug of

the charger is plugged into a socket outlet and the battery

(6) is inserted onto the charger (10).

Due to the intelligent charging method, the charging condi-

tion of the battery is automatically detected and the battery

is charged with the optimum charging current, depending on

battery temperature and voltage.

This gives longer life to the battery and always leaves it fully

charged when kept in the charger for storage.

Understanding the Indicators (AL1815CV)

Flashing battery charge indicator

The charging process is indicated by the flash-

ing of the battery charge indicator .

Continuous lighting of the battery charge indicator

Full

Continuous lighting of the battery charge in-

dicator indicates that the battery is fully

charged or that the temperature of the battery is not within

the allowable charging temperature range, and cannot be

charged for this reason. The battery is charged as soon as

the allowable charging temperature range is reached.

When the battery is not inserted, continuous lighting of the

battery charge indicator indicates that the mains plug is in-

serted in the socket outlet and that the battery charger is

ready for operation.

Meaning of the Indication Elements

(AL1830CV/AL1880CV)

(Fast) Flashing of the Green Battery Charge Indicator

The rapid-charging procedure is indicated by

fast flashing of the green battery charge in-

dicator .

Note: The rapid-charging procedure is only possible when

the battery temperature is within the allowable charging

temperature range, see section “Technical Data”.

(Slow) Flashing of the Green Battery Charge Indicator

When the charging condition of the battery is

80%, the green battery charge indicator

flashes slowly.

The battery can be removed for immediate use.

Continuous Lighting of the Green Battery Charge

Indicator

Full

Continuous lighting of the green battery

charge indicator indicates that the battery is

fully charged.

When the battery is not inserted, continuous lighting of the

battery charge indicator indicates that the mains plug is in-

serted in the socket outlet and that the battery charger is

ready for operation.

Continuous Lighting of the Red Battery Charge Indicator

Continuous lighting of the red battery charge

indicator indicates that the temperature of the

battery is not within the allowable charging temperature

range, see section “Technical Data”. As soon as the allowable

charging temperature range is reached, the battery charger

automatically switches to rapid charging.

Flashing Red Battery Charge Indicator

A flashing red battery charge indicator indic-

ates a different malfunction of the charging

procedure, see section “Troubleshooting – Causes and Cor-

rective Measures”.

Operation

Switching ON/OFF (see figures C and D)

To switch ON, firstly press and hold the lock-off button for

On/Off switch (3). Then press the On/Off switch (2) and

keep it pressed.

To switch OFF, release the lock-off button for On/Off switch

(3) and then release the On/Off switch (2).

Sawing Function

Although the tooth opening allows wood to be cut up to

Ø20mm, the tip of the blade is designed to cut wood up to

Ø25mm.

Working with the Hedgecutter (see figure E)

Move the hedgecutter evenly forward along the cutting line.

The double edge cutting blade enables cutting in either dir-

ection, or with a side to side motion.

Cut the sides of the hedge first, then the top.

To cut the sides straightly, we recommend cutting from bot-

tom to top in the direction of growth. Younger stems tend to

move outwards when cutting them from top to bottom, res-

ulting in shallow patches or holes in the hedge.

To reach a level finish, fasten a piece of string along the

length of the hedge at the required height and use as an

alignment guide. Cut the hedge just above the string.

Pay attention that no objects such as wires are cut. The

blade or drive can be damaged.

Anti Blocking

If the blade stalls on a tough material, the load of the motor

increases. The intelligent micro-electronics senses this over-

load condition and repeatedly reverses the motor, in order

to prevent stalling and to cut the branch through.

This audible reversing cut action continues for up to 3s.

After cutting through, the garden product continues in its

normal mode, or in case the overload condition continues

the blades automatically stop in the open position (e.g. in

case a piece of metal fence accidentally blocks the garden

product).

Bosch Power Tools F 016 L81 850 | (23.11.2018)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch EasyHedgeCut 18-45 Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info