Bedienungsanleitung Bosch EasyHedgeCut 18-45 (Seite 18 von 286) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

708230

Zoom out

Zoom in

Vorherige Seite

1/286

Nächste Seite

18 | English

Troubleshooting

Hedgecutter

Problem Possible Cause Corrective Action

Hedgecutter does not

operate

Battery discharged Recharge battery; also see “Battery Charging”

Battery not fully connected Ensure both locking levels are engaged

Hedgecutter operates

intermittently

Internal wiring of garden tool defective Contact Service Agent

On/Off switch defective Contact Service Agent

Motor reverses repeatedly then stops after 3s. see “Working Advice” (Anti Blocking)

Motor runs but blades

remain stationary

Internal Error Contact Service Agent

Cutting blade hot Cutting blade blunt Have blade sharpened

Cutting blade has dents Have blade inspected/overhauled

Too much friction, due to lack of lubricant Apply lubricant spray

Blade will not move Battery discharged Recharge battery; also see “Battery Charging”

Machine defective Contact Service Agent

Excessive vibrations/

noise

Machine defective Contact Service Agent

Cutting time per bat-

tery charge too low

Too much friction, due to lack of lubricant Apply lubricant spray

Blade needs cleaning Clean blade

Poor cutting technique

see “Working Advice” (figureE)

Battery not fully charged Recharge battery; also see “Battery Charging”

The blades are running

slow or the anti block-

ing feature is not func-

tioning

Battery discharged Recharge battery; also see “Battery Charging”

Battery stored outside of battery temperature Allow battery to warm naturally to room temperat-

ure (within battery operating temperature 0–

45°C)

Battery and charger

Problem Possible Cause Corrective Action

Flashing red battery

charge indicator

No charging procedure

possible

Battery not (properly) inserted Properly insert battery in charger

Battery contacts contaminated Clean the battery contacts (e. g. by inserting and

removing the battery several times) or replace

the battery

Battery defective Replace the battery

Battery charge indicat-

ors do not light up

Mains plug of battery charger not plugged in

(properly)

Insert mains plug (fully) into the socket outlet

Socket outlet, mains cable or battery charger de-

fective

Check the mains voltage; have the battery char-

ger checked by an authorised after-sales service

agent for Bosch power tools

Maintenance and Service

u Before any work on the garden product itself (e.g.

maintenance, tool change, etc.) as well as during

transport and storage, remove the battery from the

garden product. There is danger of injury when uninten-

tionally actuating the On/Off switch.

Maintenance, Cleaning and Storage (see figure

u For safe and proper working, always keep the product

clean.

For safe and proper working, always keep the garden tool

and the ventilation slots clean.

F 016 L81 850 | (23.11.2018) Bosch Power Tools

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch EasyHedgeCut 18-45 Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info