Bedienungsanleitung Bosch GBH 18V-26 F (Seite 22 von 297) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

708068

Zoom out

Zoom in

Vorherige Seite

1/297

Nächste Seite

22 | English

u Avoid dust accumulation at the workplace. Dust can

easily ignite.

Dust extraction with GDE18V-16 (accessory)

(seefigureK)

The GDE18V-16 dust extraction attachment (accessory) is

required for extracting concrete dust and stone dust.

This dust extraction system is not suitable for dust from

wood, metal and plastic or for dust which is harmful to one’s

health (e.g. asbestos).

Operation

Start-up

Inserting the Battery

u Use only original Bosch lithium-ion batteries with the

voltage stated on the type plate of your power tool.

Using other batteries can lead to injuries and pose a fire

hazard.

– Set the rotational direction switch (11) to the middle pos-

ition to avoid unintentionally switching it on.

– Slide the battery (14) all the way into the battery bay .

Setting the Operating Mode

The operating mode of the power tool is selected using the

impact/mode selector switch(16).

– To change the operating mode, press the release but-

ton(15) and turn the impact/mode selector switch(16)

until it clicks into the required position.

Note: Only change the operating mode when the power tool

is switched off. Otherwise, the power tool may become dam-

aged.

Position for hammer drilling into concrete

or stone

Position for drilling without impact in wood,

metal, ceramic and plastic and for screw-

driving

Vario-Lock position for adjusting the chisel

position

The impact/mode selector switch(16) will

not engage in this position.

Position for chiselling

Setting the Rotational Direction

The rotational direction switch (11) is used to change the ro-

tational direction of the power tool. However, this is not pos-

sible while the on/off switch (13) is being pressed.

u Only operate the rotational direction switch(11)

when the power tool is not in use.

Always set the rotational direction to clockwise rotation for

hammer drilling, drilling and chiselling.

– Clockwise: Slide the rotational direction switch(11)

all the way to the left.

– Anticlockwise: Slide the rotational direction

switch(11) all the way to the right.

Switching On and Off

– To switch on the power tool, press the on/off switch

(13).

The worklight (17) lights up when the on/off switch (13) is

lightly or fully pressed, allowing the work area to be illumin-

ated in poor lighting conditions.

When switching on the power tool for the first time, the start

may be slightly delayed as the power tool's electronic system

has to configure itself first.

For low temperatures, the power tool reaches the full ham-

mer/impact capacity only after a certain time.

– To switch off the power tool, release the on/off switch

(13).

Adjusting the Speed/Impact Rate

– Adjust the speed/impact rate of the power tool when it is

on by pressing in the on/off switch(13) to varying ex-

tents.

Applying light pressure to the on/off switch(13) results in a

low rotational speed/impact rate. Applying increasing pres-

sure to the switch increases the speed/impact rate.

Electronic Precision Control (EPC)

EPC assists you when working with impact in sensitive ma-

terials by ensuring slow start-up and reduced operating

speed.

– Slide the EPC switch(8) to the required position.

Position for maximum operating speed

Position for slow start-up and reduced oper-

ating speed

Overload clutch

u If the application tool jams or snags, the power trans-

mission to the drill spindle will be interrupted. Always

hold the power tool firmly with both hands to with-

stand the forces this may create and adopt a position

with stable footing.

u Switch the power tool off immediately and remove the

application tool if the power tool becomes blocked.

Switching on when the drilling tool is blocked may

cause high torque reactions.

1 609 92A 5GC | (14.11.2019) Bosch Power Tools

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch GBH 18V-26 F Seite 22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info