Bedienungsanleitung Bosch GBH 2-24 DSE Professional (Seite 17 von 22) (Deutsch, Portugiesisch, Spanisch)

591860

Zoom out

Zoom in

Vorherige Seite

1/22

Nächste Seite

operate this machine.

• Bosch can ensure flawless functioning of the

machine only when original accessories are used.

Changing the tool

Before any work on the machine itself, pull the

mains plug.

With the SDS-plus tool holder, simpler and

easier tool changing is possible with-out

additional aids.

The SDS-plus tool is designed to be freely

movable. This causes eccentricity when the

appliance is off-load.

However, the drill automatically centres itself during

operation.

This does not affect drilling precision.

Take care that the dust protection cap 1 is not

damaged when changing tools.

SDS-PLUS TOOLS

Inserting:

Clean and lightly oil the tool before inserting.

Insert the dust-free tool into the tool holder with

twisting until it latches. The tool locks itself.

Check the locking by pulling on the tool.

Removing:

Pull the locking sleeve 2 to the rear and hold while

removing the tool.

TOOLS WITHOUT SDS-PLUS

Do not use tools without SDS-plus for hammer

drilling or chiseling!

Steel, wood and plastic can be drilled with the ring

gear chuck (accessory) and the corresponding

adapter (accessory). (Fig. M ).

Twist the mounted dust-free drill chuck into the tool-

holding fixture and push in until it engages. The

chuck locks automatically. Pull on the drill chuck to

check that it is locked. (Fig. N ).

Set the impact stop switch 7 to Drilling (only

activate when the drill is at a standstill).

Srewdriver Bits GBH2-24 DSR (Fig. O ).

For screwdriver bits, use the SDS-plus adapter 13

(optional accessory).

Before use

Before starting work always examine the

working area for concealed electric lines,

gas and water pipes, e. g. with a metal

detector.

Always use the correct supply voltage.

The voltage of the power source must agree with the

information on the nameplate of the ma-chine.

Machines for 230 V can also be used on 220 V

power sources.

The power cord and plug must be in perfect

condition.

Auxiliary handle

For safety reasons, the percussion drill may only

be operated using the auxiliary handle 5.

Rotating the auxiliary handle 5 to the desired position

reduces operator fatigue and enables the operator to

adopt a safe stance (Fig. P ).

To rotate the auxiliary handle 5, first release the

handle by turning it counter-clockwise.

Then retighten the auxiliary handle 5.

DEPTH STOP (Fig. Q ).

Loosen the winged screw 14 on the auxiliary handle

5. Adjust the drilling depth stop t on the depth stop 4.

Retighten the winged screw.

Putting into operation

Temporary operation

• On: Press On/Off switch 8.

• Off: Release On/Off switch.

Continuous operation

• On: Press On/Off switch 8 and engage inter-lock 9.

• Off: Press On/Off switch 8 and release.

GBH 2-24 DSR: For reasons of safety, on/off switch

8 cannot be locked with locking button 9 in left

rotation.

Speed control (GBH 2-24 DSE / DSR)

Speed can be adjusted during operation by

increasing or decreasing the pressure on the On/Off

switch 8.

This enables holes to be drilled slowly in smooth

surfaces, e.g. tiles, and prevents the drill from

slipping. Splitting of drilled materials can also be

avoided.

Approx. Values

• Hammer Drilling in Concrete or Stone: press the

On/Off switch 8 to the maximum position.

• Drilling in Steel or Wood: press the On/Off switch 8

to the middle position.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch GBH 2-24 DSE Professional Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info