English–1
1 619 929 623 • (03.05) T
Please observe the order number of your machine.
The trade names of the individual machines may vary.
Measured values determined according to EN 50 144.
The A-weighted noise levels of the tool are typically:
Sound pressure level: 88 dB(A)
Sound power level: 101 dB(A)
Wear ear protection!
The typically weighted acceleration is 11 m/s
2
.
The machine is intended for hammer drilling in con-
crete, brick and stone. It is likewise suitable for drilling
without impact in wood, metal, ceramic and plastic.
Machines with electronic control and right/left rotation
are also suitable for screw driving and thread cutting.
The numbering of the product elements refers to the
illustration on the fold-out page.
1 Tool holder (SDS-plus)
2 Dust protection cap
3 Locking sleeve
4 Locking button
5 On/off switch
6 Right/Left rotation switch
7 Operational mode selection switch
8 Button on the auxiliary handle
9 Auxiliary handle
10 Depth stop
11 Drill chuck*
12 Drill chuck adapter shaft*
13 SDS-plus adapter*
* Not all the accessories illustrated or described are in-
cluded in standard delivery.
Working safely with this machine is
possible only when the operating
and safety information are read
completely and the instructions
contained therein are strictly fol-
lowed.
In addition, the general safety
notes in the enclosed booklet must
be observed.
Before using for the first time, ask
for a practical demonstration.
Wear ear protection to prevent damage
to your hearing.
Wear safety glasses.
For long hair, wear hair protection.
Work only with close-fitting clothes.
■ If the cable is damaged or cut through while work-
ing, do not touch the cable but immediately pull the
mains plug. Never use the machine with a dam-
aged cable.
■ Connect machines that are used in the open via a
residual current device (RCD) with an actuating
current of 30 mA maximum. Do not operate the
machine in rain or moisture.
■ Always direct the cable to the rear away from the
machine.
Product Specifications
Percussion drill GBH 2 PROFI
Order number 0 611 234 7..
Speed control ●
Right/Left rotation ●
Rated input power [W] 460
Power output [W] 280
Impact rate [per min] 0 ... 3900
Impact energy
per stroke [J] 1.5
Nominal speed [RPM] 0 ... 850
Tool holder SDS-plus ●
Spindle collar diameter [mm] 43
(Euro-Standard)
Maximum drill diameter:
Concrete
Wood
Steel
[mm]
[mm]
[mm]
20
30
13
Weight without mains
cable approx. [kg] 2.45
Degree of protection / II
Noise/Vibration Information
Intended Use
Product Elements
For Your Safety
