Bedienungsanleitung Bosch gbm 1 re (Seite 17 von 112) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

387119

Zoom out

Zoom in

Vorherige Seite

1/112

Nächste Seite

English | 17

Bosch Power Tools 1 609 929 V00 | (17.11.09)

f Never use the machine with a damaged ca-

ble. Do not touch the damaged cable and

pull the mains plug when the cable is dam-

aged while working. Damaged cables in-

crease the risk of an electric shock.

Products sold in GB only: Your product is fitted

with an BS 1363/A approved electric plug with

internal fuse (ASTA approved to BS 1362).

If the plug is not suitable for your socket outlets,

it should be cut off and an appropriate plug fit-

ted in its place by an authorised customer serv-

ice agent. The replacement plug should have the

same fuse rating as the original plug.

The severed plug must be disposed of to avoid a

possible shock hazard and should never be in-

serted into a mains socket elsewhere.

Products sold in AUS and NZ only: Use a resid-

ual current device (RCD) with a rated residual

current of 30 mA or less.

Functional Description

Read all safety warnings and all in-

structions. Failure to follow the

warnings and instructions may re-

sult in electric shock, fire and/or se-

rious injury.

While reading the operating instructions, unfold

the graphics page for the machine and leave it

open.

Intended Use

The machine is intended for drilling in wood,

metal, ceramic and plastic. Machines with elec-

tronic control and right and left rotation are also

suitable for screwdriving and tapping.

Product Features

The numbering of the product features refers to

the illustration of the machine on the graphics

page.

1 Keyless chuck*

2 Front sleeve

3 Rear sleeve

4 Lock-on button for On/Off switch

5 Thumbwheel for speed preselection

(GBM 10-2 RE/GBM 13-2 RE)

6 On/Off switch

7 Rotational direction switch

(GBM 10-2 RE/GBM 13-2 RE)

8 Gear selector

9 Button for depth stop adjustment

10 Auxiliary handle (insulated gripping surface)

(GBM 13-2/GBM 13-2 RE)

11 Depth stop

12 Handle (insulated gripping surface)

13 Chuck key*

14 Key type drill chuck*

15 Screwdriver bit*

16 Drill spindle with hexagon socket

(GBM 10-2 RE/GBM 13-2 RE)

17 Securing screw for für keyless chuck/key

type drill chuck

18 Open-end spanner**

*Accessories shown or described are not part of the

standard delivery scope of the product. A complete

overview of accessories can be found in our acces-

sories program.

**Commercially available (not included in the deliv-

ery scope)

Noise/Vibration Information

Measured sound values determined according

to EN 60745.

Typically the A-weighted sound pressure level of

the product is 79 dB(A). Uncertainty K=3 dB.

The noise level when working can exceed

80 dB(A).

Wear hearing protection!

Vibration total values (triax vector sum) deter-

mined according to EN 60745:

Drilling into metal: Vibration emission value

=8.5 m/s

, Uncertainty K=4.0 m/s

Screwdriving: Vibration emission value

<2.5 m/s

, Uncertainty K=1.5 m/s

Tapping: Vibration emission value a

<2.5 m/s

Uncertainty K=1.5 m/s

OBJ_BUCH-321-002.book Page 17 Tuesday, November 17, 2009 9:01 AM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch gbm 1 re Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info