Bedienungsanleitung Bosch GDE 18V-26 D (Seite 16 von 85) (Alle Sprachen)

786182

Zoom out

Zoom in

Vorherige Seite

1/85

Nächste Seite

16 | English

– Dust cap(4) for SDS plus fixed chuck for drilling diamet-

ers of 16−26mm

In addition, you must change the dust cap if its wall contact

surface shows clear signs of wear and is causing dust to es-

cape through the extraction brush during extraction.

Removing the dust cap(1)/(3):

– Press the locking button(23) and pull the dust cap up-

wards out of the holder.

Fitting the dust cap(1)/(3):

– Push the new dust cap down into the holder until the lock-

ing button audibly engages.

The extension(20) is required if you use drill bits with a total

length of 165−265mm.

– Mount and remove the extension(20) according to the

assembly/removal of the dust cap.

Emptying the Dust Box (seefigureG1–G4)

Note: Wear a dust mask when performing maintenance and

cleaning on the dust box.

Empty the dust box(24) after completing your work and as

needed, in order to ensure that the dust extraction attach-

ment continues to perform optimally. The viewing

window(15) enables you to check how full the dust box is.

– Hold the power tool with the dust extraction attachment

horizontally and switch on the dust extraction attachment

for a few seconds.

This will cause residual dust to be sucked out of the ex-

traction channel into the dust box(24).

– Press both the left-hand and right-hand release

buttons(16) and pull the dust box(24) out of the dust

extraction attachment.

– Shake out the dust box(24) over a suitable waste bin.

– Press both the left-hand and right-hand locking tabs(26)

inwards and pull the HEPA filter(25) out of the dust box.

– Carefully tap against the HEPA filter to empty it or brush

down the flaps of the HEPA filter using a soft brush.

Note: Do not clean the HEPA filter with water and do not

use compressed air to blow it clean.

– Put the HEPA filter(25) back in the dust box(24) after

cleaning it. Then slide the dust box into the dust extrac-

tion attachment until the release buttons(16) audibly en-

gage.

Maintenance and Service

Maintenance and Cleaning

uRemove the battery from the power tool before carry-

ing out work on the power tool (e.g. maintenance,

changing tool, etc.). The battery should also be re-

moved for transport and storage. There is risk of injury

from unintentionally pressing the on/off switch.

uTo ensure safe and efficient operation, always keep

the power tool and the ventilation slots clean.

– Clean the dust extraction attachment using a dry, soft

cloth.

After-Sales Service and Application Service

Our after-sales service responds to your questions concern-

ing maintenance and repair of your product as well as spare

parts. You can find explosion drawings and information on

spare parts at: www.bosch-pt.com

The Bosch product use advice team will be happy to help you

with any questions about our products and their accessor-

ies.

In all correspondence and spare parts orders, please always

include the 10‑digit article number given on the nameplate

of the product.

Great Britain

Robert Bosch Ltd. (B.S.C.)

P.O. Box 98

Broadwater Park

North Orbital Road

Denham Uxbridge

UB 9 5HJ

At www.bosch-pt.co.uk you can order spare parts or arrange

the collection of a product in need of servicing or repair.

Tel. Service: (0344) 7360109

E-Mail: boschservicecentre@bosch.com

You can find further service addresses at:

www.bosch-pt.com/serviceaddresses

Transport

The recommended lithium-ion batteries are subject to legis-

lation on the transport of dangerous goods. The user can

transport the batteries by road without further require-

ments.

When shipping by third parties (e.g.: by air transport or for-

warding agency), special requirements on packaging and la-

belling must be observed. For preparation of the item being

shipped, consulting an expert for hazardous material is re-

quired.

Dispatch battery packs only when the housing is undam-

aged. Tape or mask off open contacts and pack up the bat-

tery in such a manner that it cannot move around in the

packaging. Please also observe the possibility of more de-

tailed national regulations.

Disposal

Dust extraction attachments, batteries, ac-

cessories and packaging should be sorted for

environmentally friendly recycling.

Do not dispose of dust extraction attachments

and batteries/rechargeable batteries into

household waste!

Only for EU countries:

According to the Directive 2012/19/EU on waste electrical

and electronic equipment and its transposition into national

law, dust extraction attachments that are no longer usable,

and, according to the Directive 2006/66/EC, defective or

1 609 92A 7YA | (11.07.2022) Bosch Power Tools

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch GDE 18V-26 D Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info