Bedienungsanleitung Bosch GEF 7 E Professional (Seite 12 von 152) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

592532

Zoom out

Zoom in

Vorherige Seite

1/152

Nächste Seite

12 | English

1 609 92A 0Y0 | (28.7.14) Bosch Power Tools

 Secure the workpiece. A workpiece clamped with clamp-

ing devices or in a vice is held more secure than by hand.

 Always wait until the machine has come to a complete

stop before placing it down. The tool insert can jam and

lead to loss of control over the power tool.

Products sold in GB only: Your product is fitted with a

BS 1363/A approved electric plug with internal fuse (ASTA

approved to BS 1362).

If the plug is not suitable for your socket outlets, it should be

cut off and an appropriate plug fitted in its place by an author-

ised customer service agent. The replacement plug should

have the same fuse rating as the original plug.

The severed plug must be disposed of to avoid a possible

shock hazard and should never be inserted into a mains sock-

et elsewhere.

Products sold in AUS and NZ only: Use a residual current de-

vice (RCD) with a rated residual current of 30 mA or less.

Product Description and Specifica-

tions

Read all safety warnings and all instruc-

tions. Failure to follow the warnings and in-

structions may result in electric shock, fire

and/or serious injury.

While reading the operating instructions, unfold the graphics

page for the machine and leave it open.

Intended Use

The power tool is intended for dry sanding, structuring and

polishing metal.

Product Features

The numbering of the product features refers to the illustra-

tion of the machine on the graphics page.

1 Adjustment screw for belt run

2 Spindle lock

3 Auxiliary handle (insulated gripping surface)

4 On/Off switch

5 Clamping lever for sanding attachment

6 Thumbwheel for belt speed preselection

7 Drive roller

8 Attachment cover

9 Fastening screw for attachment cover

10 Sanding attachment

11 Guide element*

12 Sanding belt*

13 Guide roller

14 Supporting surface

15 Handle (insulated gripping surface)

16 Sanding arm*

*Accessories shown or described are not part of the standard de-

livery scope of the product. A complete overview of accessories

can be found in our accessories program.

Technical Data

Noise/Vibration Information

Sound emission values determined according to

EN 60745-2-4.

Typically the A-weighted noise levels of the product are:

Sound pressure level 89 dB(A); Sound power level

100 dB(A). Uncertainty K =3 dB.

Wear hearing protection!

Vibration total values a

(triax vector sum) and uncertainty K

determined according to EN 60745:

=2m/s

, K=1.5 m/s

The vibration level given in this information sheet has been

measured in accordance with a standardised test given in

EN 60745 and may be used to compare one tool with anoth-

er. It may be used for a preliminary assessment of exposure.

The declared vibration emission level represents the main ap-

plications of the tool. However if the tool is used for different

applications, with different accessories or insertion tools or is

poorly maintained, the vibration emission may differ. This

may significantly increase the exposure level over the total

working period.

An estimation of the level of exposure to vibration should also

take into account the times when the tool is switched off or

when it is running but not actually doing the job. This may sig-

nificantly reduce the exposure level over the total working

period.

Identify additional safety measures to protect the operator

from the effects of vibration such as: maintain the tool and the

accessories, keep the hands warm, organisation of work pat-

terns.

Electric File GEF 7 E

Article number

3 601 HA8 0..

Rated power input

W720

Belt speed at thumbwheel setting

–1

–2

–3

–4

–5

–6

m/s

3.5

5.0

7.0

9.0

10.5

12.0

Sanding belt length

mm 457

Sanding belt width

mm 6/13/20

Belt speed preselection



Soft start



Weight according to

EPTA-Procedure 01/2003

kg 2.0

Protection class

/II

The values given are valid for a nominal voltage [U] of 230 V. For differ-

ent voltages and models for specific countries, these values can vary.

OBJ_BUCH-1841-003.book Page 12 Monday, July 28, 2014 1:57 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch GEF 7 E Professional Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info