Bedienungsanleitung Bosch GHO 12V-20 Professional (Seite 14 von 223) (Alle Sprachen)

786104

Zoom out

Zoom in

Vorherige Seite

1/223

Nächste Seite

14 | English

Service

uHave your power tool serviced by a qualified repair

person using only identical replacement parts. This

will ensure that the safety of the power tool is maintained.

uNever service damaged battery packs. Service of bat-

tery packs should only be performed by the manufacturer

or authorized service providers.

Safety instructions for planers

uWait for the cutter to stop before setting the tool

down. An exposed rotating cutter may engage the sur-

face leading to possible loss of control and serious injury.

uUse clamps or another practical way to secure and

support the workpiece to a stable platform. Holding

the workpiece by your hand or against the body leaves it

unstable and may lead to loss of control.

uOnly bring the power tool into contact with the work-

piece when switched on. Otherwise there is danger of

kickback if the cutting tool jams in the workpiece.

uDo not allow the chip ejector to come into contact with

your hands. You may be injured by rotating parts.

uNever plane over metal objects, nails or screws. Cut-

ters and cutter shafts could become damaged and cause

increased vibration.

uUse suitable detectors to determine if there are hid-

den supply lines or contact the local utility company

for assistance. Contact with electric cables can cause

fire and electric shock. Damaging gas lines can lead to ex-

plosion. Breaking water pipes causes property damage.

uWhile working, always hold the planer in such a way

that the planer base plate lies flat against the work-

piece. Otherwise the planer could slip and cause injury.

uIn case of damage and improper use of the battery, va-

pours may be emitted. The battery can set alight or ex-

plode. Ensure the area is well ventilated and seek medical

attention should you experience any adverse effects. The

vapours may irritate the respiratory system.

uDo not open the battery. There is a risk of short-circuit-

ing.

uThe battery can be damaged by pointed objects such

as nails or screwdrivers or by force applied externally.

An internal short circuit may occur, causing the battery to

burn, smoke, explode or overheat.

uOnly use the battery with products from the manufac-

turer. This is the only way in which you can protect the

battery against dangerous overload.

Protect the battery against heat, e.g. against

continuous intense sunlight, fire, dirt, water

and moisture. There is a risk of explosion and

short-circuiting.

uHold the power tool firmly with both hands and make

sure you have a stable footing. The power tool can be

more securely guided with both hands.

Product Description and

Specifications

Read all the safety and general instructions.

Failure to observe the safety and general in-

structions may result in electric shock, fire

and/or serious injury.

Please observe the illustrations at the beginning of this oper-

ating manual.

Intended use

The power tool is intended for planing wood-based materials

such as beams and boards while resting firmly on the work-

piece. It is also suitable for chamfering edges and for rebat-

ing.

Product features

The numbering of the product features refers to the diagram

of the power tool on the graphics page.

(1) Knob for setting the cutting depth

(2) Button for maximising the cutting depth (max. 2 mm)

(3) Lock-off button for on/off switch

(4) On/off switch

(5) BatteryA)

(6) Battery release button (2x)A)

(7) Drawer for spare blades

(8) Side cutter block guard

(9) Planer base plate

(10) Battery charge indicator

(11) Screw for belt cover

(12) Belt cover

(13) Chip ejector (can be inserted on the right-hand or

left-hand side)

(14) Adjustable planer base plate

(15) V-groove

(16) Handle (insulated gripping surface)

(17) HM/TC planer blade

(18) Hex key

(19) Blade head

(20) Clamping element for planer blade

(21) Fastening screw for planer blade (2x)

(22) Extraction hose (dia. 35 mm) (Click & Clean)A)

(23) Chip/dust bagA)

(24) Dust extraction adapter (Click & Clean)A)

(25) Locking deviceA)

(26) Snap fastener

A) Accessories shown or described are not included with the

product as standard. You can find the complete selection of

accessories in our accessories range.

1 609 92A 4LD | (19.02.2019) Bosch Power Tools

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch GHO 12V-20 Professional Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info