Bedienungsanleitung Bosch GHO 12V-20 Professional (Seite 17 von 223) (Alle Sprachen)

786104

Zoom out

Zoom in

Vorherige Seite

1/223

Nächste Seite

English | 17

Material Planing width

in mm Cutting depth

in mm

0–1.0 0–2.0

Plywood < 20 ● ●

20−30 ● −

Phenolic resin-coated

plywood < 15 ● ●

15−30 ● −

MDF sheets < 20 ● ●

20−30 ● −

Veneers 1 ● ●

Hardwood veneers 3−5 ● ●

Two-part filler 3−5 ● ●

Cardboard 2 ● ●

Start-up

Inserting the battery

Insert the charged battery (5) into the battery holder until it

is flush and you feel it engage.

Switching on/off

uMake sure that you are able to press the On/Off switch

without releasing the handle.

To start the power tool, first press the lock-off button (4),

then press and hold the on/off switch (4).

To switch off the power tool, release the on/off switch (4).

Note: For safety reasons, the on/off switch (4) cannot be

locked; it must remain pressed during the entire operation.

Battery charge-control indicator

When the on/off switch (4) is pressed in halfway or com-

pletely, the battery charge indicator (10) indicates the bat-

tery's state of charge for several seconds. The indicator con-

sists of three green LEDs.

LEDs Capacity

3 × continuous green light ≥ 66%

2 × continuous green light ≥ 33%

1 × continuous green light <33%

1 × flashing green light Reserve

Temperature-dependent Overload Protection

In the event of an overload, the speed is reduced. Allow the

power tool to cool down unloaded at its maximum no-load

speed for approx. 30 seconds.

Practical advice

uRemove the battery from the power tool before carry-

ing out work on the power tool (e.g. maintenance,

changing tool, etc.). The battery should also be re-

moved for transport and storage. There is risk of injury

from unintentionally pressing the on/off switch.

Planing Procedure

Set the required cutting depth and attach the power tool

with the adjustable planer base plate (14) to the workpiece.

uOnly bring the power tool into contact with the work-

piece when switched on. Otherwise there is danger of

kickback if the cutting tool jams in the workpiece.

Switch on the power tool and guide it over the surface of the

workpiece, applying uniform feed.

To achieve high-quality surfaces, apply only a low feed rate

and exert pressure on the middle of the planer base plate.

For the processing of hard materials, such as hardwood, and

also when utilising the maximum planing width, set only a

low cutting depth and reduce the planer feed as appropriate.

Excessive feed reduces the quality of the surface finish and

can lead to the chip ejector quickly becoming blocked.

Only sharp planer blades achieve good cutting performance

and make the power tool last longer.

Chamfering edges (see figure D)

The V-groove (15) in the front of the planer base plate en-

ables quick and easy chamfering of workpiece edges. Posi-

tion the planer with the V-groove onto the edge of the work-

piece and guide it along.

Groove used Dimension a

(mm)

V-groove 2.1–5.0

Medium 0.0–2.8

Maintenance and Service

Maintenance and cleaning

uRemove the battery from the power tool before carry-

ing out work on the power tool (e.g. maintenance,

changing tool, etc.). The battery should also be re-

moved for transport and storage. There is risk of injury

from unintentionally pressing the on/off switch.

uTo ensure safe and efficient operation, always keep

the power tool and the ventilation slots clean.

Clean the power tool at regular intervals using compressed

air.

Keep the side cutter block guard (8) clear and clean it regu-

larly.

After-Sales Service and Application Service

Our after-sales service responds to your questions concern-

ing maintenance and repair of your product as well as spare

parts. You can find explosion drawings and information on

spare parts at: www.bosch-pt.com

The Bosch product use advice team will be happy to help you

with any questions about our products and their accessor-

ies.

In all correspondence and spare parts orders, please always

include the 10‑digit article number given on the nameplate

of the product.

Great Britain

Robert Bosch Ltd. (B.S.C.)

P.O. Box 98

Bosch Power Tools 1 609 92A 4LD | (19.02.2019)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch GHO 12V-20 Professional Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info