Bedienungsanleitung Bosch GHO 15-82 Professional (Seite 12 von 164) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

593157

Zoom out

Zoom in

Vorherige Seite

1/164

Nächste Seite

12 | English

1 609 92A 11E | (1.12.14) Bosch Power Tools

Power tool use and care

 Do not force the power tool. Use the correct power tool

for your application. The correct power tool will do the

job better and safer at the rate for which it was designed.

 Do not use the power tool if the switch does not turn it

on and off. Any power tool that cannot be controlled with

the switch is dangerous and must be repaired.

 Disconnect the plug from the power source and/or the

battery pack from the power tool before making any

adjustments, changing accessories, or storing power

tools. Such preventive safety measures reduce the risk of

starting the power tool accidentally.

 Store idle power tools out of the reach of children and

do not allow persons unfamiliar with the power tool or

these instructions to operate the power tool. Power

tools are dangerous in the hands of untrained users.

 Maintain power tools. Check for misalignment or bind-

ing of moving parts, breakage of parts and any other

condition that may affect the power tool’s operation. If

damaged, have the power tool repaired before use. Many

accidents are caused by poorly maintained power tools.

 Keep cutting tools sharp and clean. Properly maintained

cutting tools with sharp cutting edges are less likely to bind

and are easier to control.

 Use the power tool, accessories and tool bits etc. in ac-

cordance with these instructions, taking into account

the working conditions and the work to be performed.

Use of the power tool for operations different from those

intended could result in a hazardous situation.

Service

 Have your power tool serviced by a qualified repair per-

son using only identical replacement parts. This will en-

sure that the safety of the power tool is maintained.

Planer Safety Rules

 Wait for the cutter to stop before setting the tool down.

An exposed rotating cutter may engage the surface leading

to possible loss of control and serious injury.

 Hold the power tool by insulated gripping surfaces on-

ly, because the cutter may contact its own cord. Cutting

a “live” wire may make exposed metal parts of the power

tool “live” and could give the operator an electric shock.

 Use clamps or another practical way to secure and sup-

port the workpiece to a stable platform. Holding the

work by your hand or against the body leaves it unstable

and may lead to loss of control.

 Use suitable detectors to determine if utility lines are

hidden in the work area or call the local utility company

for assistance. Contact with electric lines can lead to fire

and electric shock. Damaging a gas line can lead to explo-

sion. Penetrating a water line causes property damage or

may cause an electric shock.

 Do not reach into the chip ejector with your hands. They

could be injured by rotating parts.

 Apply the machine to the workpiece only when

switched on. Otherwise there is danger of kickback when

the cutting tool jams in the workpiece.

 When working, always hold the planer in such a manner

that the planer base plate faces flat on the workpiece.

Otherwise the planer can become wedged and lead to inju-

ries.

 Never plane over metal objects, nails or screws. The

planer blade and the blade shaft can become damaged and

lead to increased vibrations.

Products sold in GB only: Your product is fitted with a

BS 1363/A approved electric plug with internal fuse (ASTA

approved to BS 1362).

If the plug is not suitable for your socket outlets, it should be

cut off and an appropriate plug fitted in its place by an author-

ised customer service agent. The replacement plug should

have the same fuse rating as the original plug.

The severed plug must be disposed of to avoid a possible

shock hazard and should never be inserted into a mains sock-

et elsewhere.

Products sold in AUS and NZ only: Use a residual current de-

vice (RCD) with a rated residual current of 30 mA or less.

Product Description and Specifica-

tions

Read all safety warnings and all instruc-

tions. Failure to follow the warnings and in-

structions may result in electric shock, fire

and/or serious injury.

While reading the operating instructions, unfold the graphics

page for the machine and leave it open.

Intended Use

The machine is intended for planing of firmly supported

wooden materials, such as beams and boards. It is also suita-

ble for beveling edges and rebating.

Product Features

The numbering of the product features refers to the illustra-

tion of the machine on the graphics page.

1 Planing depth scale

2 Depth adjustment knob (insulated gripping surface)

3 Chip ejector

4 Lock-off button for On/Off switch

5 On/Off switch

6 Planer base plate

7 V-grooves

8 Handle (insulated gripping surface)

9 Blade drum

10 Clamping element for blade

11 Fastening screw for planer blade

12 Carbide blade (TC)

13 Hex key

14 Extraction hose (Ø 35 mm)*

15 Chip/dust bag*

16 Park rest

17 Parallel guide

OBJ_BUCH-865-006.book Page 12 Monday, December 1, 2014 7:58 AM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch GHO 15-82 Professional Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info