Bedienungsanleitung Bosch GKS 10.8 V-LI (Seite 19 von 245) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

544105

Zoom out

Zoom in

Vorherige Seite

1/245

Nächste Seite

English | 19

Bosch Power Tools 1 619 P11 365 | (8.10.13)

Switching On and Off

To start the machine, first push the lock-off button for the

On/Off switch 3 and then press the On/Off switch 4 and keep

it pressed.

To switch off the machine, release the On/Off switch 4.

Note: For safety reasons, the On/Off switch 4 cannot be

locked; it must remain pressed during the entire operation.

To save energy, only switch the power tool on when using it.

Run-on Brake

An integrated run-on brake reduces the run-on period of the

saw blade after switching off the machine.

Temperature Control/Overload Protection Indicator

The red LED indicator 16 will help you in protecting the bat-

tery against overheating and the motor against overloading.

When the LED indicator 16 continuously lights up red, the

temperature of the battery is too high and the machine

switches off automatically.

– Switch the power tool off.

– Allow the battery to cool down before continuing to work.

The LED indicator 16 flashes red, the power tool is blocked

and switches off automatically.

Remove the power tool from the workpiece.

The power tool will continue to work as soon as the blockage

is rectified.

Protection Against Deep Discharging

The lithium ion battery is protected against deep discharging

by the “Electronic Cell Protection (ECP)”. When the battery is

empty, the machine is switched off by means of a protective

circuit: The inserted tool no longer rotates.

Switching on the LED Work Area Illumination

The power light 26 lights up when the On/Off switch 4 is

slightly or completely pressed, and allows the work area to be

illuminated when lighting conditions are insufficient.

Working Advice

Protect saw blades against impact and shock.

Guide the machine evenly and with light feed in the cutting di-

rection. Excessive feed significantly reduces the service life of

the saw blade and can cause damage to the power tool.

Sawing performance and cutting quality depend essentially

on the condition and the tooth form of the saw blade. There-

fore, use only sharp saw blades that are suited for the material

to be worked.

Sawing Wood

The correct selection of the saw blade depends on the type

and quality of the wood and whether lengthway or crossway

cuts are required.

When cutting spruce lengthways, long spiral chips are

formed.

Beech and oak dusts are especially detrimental to health.

Therefore, work only with dust extraction.

Sawing with Parallel Guide (see figure D)

The parallel guide 32 enables exact cuts along a workpiece

edge and cutting strips of the same dimension.

Set the desired cutting width at the outer edge of the base

plate using the scale on the guides of the parallel guide/guide

rail adapter (see figure D).

Sawing with Auxiliary Guide (see figure F)

For sawing large workpieces or straight edges, a board or

strip can clamped to the workpiece as an auxiliary guide; the

base plate of the circular saw can be guided alongside the aux-

iliary guide.

Sawing with Guide Rail (see figure E)

The guide rail 34 is used to carry out straight cuts.

Note: Use the guide rail 34 only for right-angled cuts. When

using for mitre cuts, the guide rail 34 can become damaged.

The adhesive coating prevents the guide rail from slipping and

protects the surface of the workpiece. The coating of the

guide rail allows the circular saw to glide easily.

Fasten the guide rail 34 to the workpiece using suitable

clamping devices, e.g. screw clamps. Put the power tool with

mounted guide rail adapter on the guide rail.

Note: Mount the parallel guide/guide rail adapter 32 on the

power tool with the Bosch logo facing down.

The guide rail 34 must not extend beyond the face side of

the workpiece where the cut is to be started.

Switch the machine on and guide it in the cutting direction ap-

plying moderate and steady feed.

Working with parallel guide/guide rail adapter and vacu-

um hose

First mount the extraction adapter 29 with vacuum hose 30

and then the parallel guide/guide adapter 32.

Note: Use only the intended screws to fix the parallel

guide/guide adapter 32 and the extraction adapter 29!

Recommendations for Optimal Handling of the Battery

Protect the battery against moisture and water.

Store the battery only within a temperature range between

0 °C and 50 °C. As an example, do not leave the battery in the

car in summer.

Occasionally clean the venting slots of the battery using a soft,

clean and dry brush.

A significantly reduced working period after charging indi-

cates that the battery is used and must be replaced.

Observe the notes for disposal.

Maintenance and Service

Maintenance and Cleaning

 Before any work on the machine itself (e.g. mainte-

nance, tool change, etc.) as well as during transport

and storage, remove the battery from the power tool.

There is danger of injury when unintentionally actuating

the On/Off switch.

OBJ_BUCH-2006-001.book Page 19 Tuesday, October 8, 2013 10:38 AM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch GKS 10.8 V-LI Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info