Bedienungsanleitung Bosch GKS 12V-26 (Seite 17 von 275) (Alle Sprachen)

786132

Zoom out

Zoom in

Vorherige Seite

1/275

Nächste Seite

English | 17

cuts”. Raise the lower guard by the retracting handle

and as soon as the blade enters the material, the lower

guard must be released.For all other sawing, the lower

guard should operate automatically.

uAlways observe that the lower guard is covering the

blade before placing the saw down on bench or

floor.An unprotected, coasting blade will cause the saw

to walk backwards, cutting whatever is in its path. Be

aware of the time it takes for the blade to stop after

switch is released.

Additional safety warnings

uDo not allow the chip ejector to come into contact with

your hands. You may be injured by rotating parts.

uDo not use the saw above the level of your head. Doing

so will mean you have inadequate control of the power

tool.

uUse suitable detectors to determine if there are hid-

den supply lines or contact the local utility company

for assistance. Contact with electric cables can cause

fire and electric shock. Damaging gas lines can lead to ex-

plosion. Breaking water pipes causes property damage.

uDo not operate the power tool when stationary . It is

not suitable for operation with a saw table.

uWhen performing plunge cuts which are not right-

angled, secure the guide plate of the saw so that it will

not shift sideways.In the event of a sideways shift, the

saw blade may become jammed, which could lead to kick-

back.

uDo not use HSS saw blades. Such saw blades can easily

break.

uDo not saw any ferrous metals. Hot chips may ignite the

dust extractor.

uIn case of damage and improper use of the battery, va-

pours may be emitted. Ensure the area is well-ventilated

and seek medical attention should you experience any ad-

verse effects. The vapours may irritate the respiratory

system.

uDo not open the battery. There is a risk of short-circuit-

ing.

uThe battery can be damaged by pointed objects such

as nails or screwdrivers or by force applied externally.

An internal short circuit may occur, causing the battery to

burn, smoke, explode or overheat.

uOnly use the battery with products from the manufac-

turer. This is the only way in which you can protect the

battery against dangerous overload.

Protect the battery against heat, e.g.

against continuous intense sunlight, fire,

water and moisture. There is a risk of explo-

sion.

uAlways wait until the power tool has come to a com-

plete stop before placing it down. The application tool

can jam and cause you to lose control of the power tool.

Product Description and

Specifications

Read all the safety and general instructions.

Failure to observe the safety and general in-

structions may result in electric shock, fire

and/or serious injury.

Please observe the illustrations at the beginning of this oper-

ating manual.

Intended use

The power tool is intended for making straight cuts in wood

with and against the grain and mitre cuts in wood while rest-

ing firmly against the workpiece.

Product features

The numbering of the product features refers to the diagram

of the power tool on the graphics page.

(1) Battery

(2) Battery release button

(3) Lock-off button for on/off switch

(4) On/off switch

(5) Hex key

(6) Spindle lock button

(7) Base plate

(8) Fastening screw for parallel guide

(9) Scale for mitre/bevel angles

(10) Wing bolt for mitre/bevel angle preselection

(11) Cut mark 45°

(12) Cut mark 0°

(13) Protective guard

(14) Handle (insulated gripping surface)

(15) Battery charge indicator

(16) Temperature monitoring/overload protection indic-

ator

(17) Wing bolt for preselecting the cutting depth

(18) Cutting depth scale

(19) Adjusting lever for retracting blade guard

(20) Saw spindle

(21) Retracting blade guard

(22) Mounting flange

(23) Circular saw blade

(24) Clamping flange

(25) Clamping bolt

(26) “PowerLight” lamp

(27) Reference mark for mitre angle setting

(28) Fastening screw for dust extraction adaptera)

(29) Dust extraction adaptera)

(30) Dust extraction hosea)

(31) Reference mark for cutting depth setting

Bosch Power Tools 1 609 92A 7TA | (17.05.2022)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch GKS 12V-26 Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info