Bedienungsanleitung Bosch GNH 18V-64 (Seite 18 von 315) (Alle Sprachen)

786282

Zoom out

Zoom in

Vorherige Seite

1/315

Nächste Seite

18 | English

Service

uHave your power tool serviced by a qualified repair

person using only identical replacement parts. This

will ensure that the safety of the power tool is maintained.

Tacker safety warnings

uAlways assume that the tool contains fasteners. Care-

less handling of the tacker can result in unexpected firing

of fasteners and personal injury.

uDo not point the tool towards yourself or anyone

nearby. Unexpected triggering will discharge the fastener

causing an injury.

uDo not actuate the tool unless the tool is placed firmly

against the workpiece. If the tool is not in contact with

the workpiece, the fastener may be deflected away from

your target.

uDisconnect the tool from the power source when the

fastener jams in the tool. While removing a jammed

fastener, the tacker may be accidentally activated if it is

plugged in.

uUse caution while removing a jammed fastener. The

mechanism may be under compression and the fastener

may be forcefully discharged while attempting to free a

jammed condition.

uDo not use this tacker for fastening electrical cables. It

is not designed for electric cable installation and may

damage the insulation of electric cables thereby causing

electric shock or fire hazards.

uUse suitable detectors to determine if there are hid-

den supply lines or contact the local utility company

for assistance. Contact with electric cables can cause

fire and electric shock. Damaging gas lines can lead to ex-

plosion. Breaking water pipes causes property damage.

uIn case of damage and improper use of the battery, va-

pours may be emitted. The battery can set alight or ex-

plode. Ensure the area is well ventilated and seek medical

attention should you experience any adverse effects. The

vapours may irritate the respiratory system.

uDo not open the battery. There is a risk of short-circuit-

ing.

uThe battery can be damaged by pointed objects such

as nails or screwdrivers or by force applied externally.

An internal short circuit may occur, causing the battery to

burn, smoke, explode or overheat.

uOnly use the battery with products from the manufac-

turer. This is the only way in which you can protect the

battery against dangerous overload.

Protect the battery against heat, e.g. against

continuous intense sunlight, fire, dirt, water

and moisture. There is a risk of explosion and

short-circuiting.

Product Description and

Specifications

Read all the safety and general instructions.

Failure to observe the safety and general in-

structions may result in electric shock, fire

and/or serious injury.

Please observe the illustrations at the beginning of this oper-

ating manual.

Intended Use

The power tool is intended for connecting work in roofing,

encasing and battening, as well as manufacturing wall and

ceiling elements, wood facades, pallets, wood fences, noise-

reduction walls and boxes.

Only the fasteners (nails, staples, etc.) specified in the

"Technical Data" table may be used.

Note: The power tool is not suitable for driving nails into

metal or concrete.

GNH18V-64M: Please do not use the power tool in contact

actuation mode with automatic return while working on scaf-

folding, ladders or other platforms and when a change of

working position is required. In this case, only use the single

actuation mode with backup sequence.

Product Features

The numbering of the product features refers to the diagram

of the power tool on the graphics page.

(1) Workpiece protector

(2) Discharge lock-off

(3) Clamping lever for opening/closing the shot duct

(4) Thumbwheel for depth stop adjustment

(5) Trigger

(6) Battery release button

(7) Rechargeable battery

(8) Handle (insulated gripping surface)

(9) User interface

(10) Storage for workpiece protector

(11) Belt hook

(12) Magazine

(13) Magazine slider

(14) Nail pusher

(15) Outlet

(16) Nail stripa)

(17) Magazine spring

(18) On/off switch button (user interface)

(19) On/off switch status (user interface)

(20) Single actuation display (user interface)

(GNH18V-64M)

1 609 92A 81N | (01.08.2022) Bosch Power Tools

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch GNH 18V-64 Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info