Bedienungsanleitung Bosch GNH 18V-64 (Seite 20 von 315) (Alle Sprachen)

786282

Zoom out

Zoom in

Vorherige Seite

1/315

Nächste Seite

20 | English

The vibration level and noise emission value given in these

instructions have been measured in accordance with a

standardised measuring procedure and may be used to com-

pare power tools. They may also be used for a preliminary

estimation of vibration and noise emissions.

The stated vibration level and noise emission value repres-

ent the main applications of the power tool. However, if the

power tool is used for other applications, with different ap-

plication tools or is poorly maintained, the vibration level

and noise emission value may differ. This may significantly

increase the vibration and noise emissions over the total

working period.

To estimate vibration and noise emissions accurately, the

times when the tool is switched off or when it is running but

not actually being used should also be taken into account.

This may significantly reduce vibration and noise emissions

over the total working period.

Implement additional safety measures to protect the oper-

ator from the effects of vibration, such as servicing the

power tool and application tools, keeping their hands warm,

and organising workflows correctly.

Assembly

Battery Charging

uUse only the chargers listed in the technical data. Only

these chargers are matched to the lithium-ion battery of

your power tool.

Note: The battery is supplied partially charged. To ensure

full battery capacity, fully charge the battery in the charger

before using your tool for the first time.

The lithium-ion battery can be charged at any time without

reducing its service life. Interrupting the charging process

does not damage the battery.

The lithium-ion battery is protected against deep discharge

by "Electronic Cell Protection (ECP)". A protective circuit

switches off the product in which the battery is being used

when the battery is discharged. No more fasteners are dis-

charged.

uDo not continue to press the trigger switch after the

tool has been automatically switched off. This can

damage the battery.

Follow the instructions on correct disposal.

Removing the Battery

The rechargeable battery(7) is equipped with two locking

levels to prevent the rechargeable battery from falling out if

the rechargeable battery release button(6) is pressed unin-

tentionally. The rechargeable battery is held in place by a

spring when fitted in the power tool.

– To remove the rechargeable battery(7), press the re-

lease button(6) and pull the battery out of the power

tool. Do not use force to do this.

Battery charge indicator

The green LEDs on the battery charge indicator indicate the

state of charge of the battery. For safety reasons, it is only

possible to check the state of charge when the power tool is

not in operation.

Press the button for the battery charge indicator or to

show the state of charge. This is also possible when the bat-

tery is removed.

If no LED lights up after pressing the button for the battery

charge indicator, then the battery is defective and must be

replaced.

Battery model GBA 18V...

LEDs Capacity

3× continuous green light 60−100%

2× continuous green light 30−60%

1× continuous green light 5−30%

1× flashing green light 0−5%

Battery model ProCORE18V...

LEDs Capacity

5× continuous green light 80−100%

4× continuous green light 60−80%

3× continuous green light 40−60%

2× continuous green light 20−40%

1× continuous green light 5−20%

1× flashing green light 0−5%

Loading the magazine (seefiguresA1–A4)

uRemove the rechargeable battery before adjusting the

tool settings, changing accessories, or storing the

power tool. This safety measure prevents the power tool

from being started accidentally.

Use only originalBosch accessories. The precision parts of

the power tool, such as the magazine, the outlet and the shot

duct, are matched toBosch staples, nails and brads. Other

manufacturers use different steel grades and sizes.

Using unapproved fasteners can damage the power tool and

cause injuries.

While loading the magazine, hold the power tool in such a

manner that the outlet(15) is not pointed at your body or at

other persons.

– Clean the magazine slider(13) as required and make sure

that the magazine(12) is not contaminated.

– Insert a suitable nail strip(16) in the T-slot at the end of

the magazine(12).

1 609 92A 81N | (01.08.2022) Bosch Power Tools

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch GNH 18V-64 Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info