Bedienungsanleitung Bosch GOP 10.8 V-LI Professional (Seite 17 von 234) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

591822

Zoom out

Zoom in

Vorherige Seite

1/234

Nächste Seite

English | 17

Bosch Power Tools 1 609 92A 116 | (31.3.15)

Mounting/Replacing the Application Tool/Accessory

If required, remove an already mounted application tool/ac-

cessory.

For removing the application tool/accessory, loosen the

screw 11 with the hex key 12 and remove the application

tool/accessory.

Mount the requested application tool/accessory (e.g. plunge

cut saw blade 10) in such a manner on the tool holder 8 that

the offset faces downward (see illustration on the graphics

page; marking on the application tool/accessory is readable

from above).

Turn the application tool/accessory to a position favourable

for the respective job, and allow it to engage into the cams of

the tool holder 8. 12 different positions are possible, each

offset by 30°.

For more intermediate positions, the adapter 13 (accessory)

can be used: Allow the adapter to engage with the smooth

side onto the cams of the tool holder 8 (see illustration on the

graphics page). Position the application tool/accessory onto

the adapter in any position.

Fasten the application tool/accessory with bolt 11. Tighten

the bolt with hex key 12 until the spring washer of the bolt fac-

es flush against the application tool/accessory.

 Check the tight seating of the application tool/accesso-

ry. Incorrect or not securely fastened application tools/

accessories can come loose during operation and pose a

hazard.

Mounting/Replacing a Sanding Sheet on the Sanding

Plate

The sanding plate 14 is fitted with Velcro backing for quick

and easy fastening of sanding sheets with Velcro adhesion.

Before attaching the sanding sheet 15, free the Velcro back-

ing of the sanding plate 14 from any debris by tapping against

it in order to enable optimum adhesion.

Position the sanding sheet 15 flush alongside one edge of the

sanding plate 14, then lay the sanding sheet onto the sanding

plate and press firmly.

To ensure optimum dust extraction, pay attention that the

punched holes in the sanding sheet match with the holes in

the sanding plate.

To remove the sanding sheet 15, grasp it at one of the tips and

pull it off from the sanding plate 14.

You can use all sanding sheets, fleece pads/polishing cloth

pads of the Delta 93 mm series of Bosch accessory program.

Sanding accessories, such as fleece pads/polishing cloth

pads, are attached to the sanding plate in the same manner.

Selecting the Sanding Sheet

Depending on the material to be worked and the required rate of material removal, different sanding sheets are available:

Dust/Chip Extraction

 Dusts from materials such as lead-containing coatings,

some wood types, minerals and metal can be harmful to

one’s health. Touching or breathing-in the dusts can cause

allergic reactions and/or lead to respiratory infections of

the user or bystanders.

Certain dusts, such as oak or beech dust, are considered

as carcinogenic, especially in connection with wood-treat-

ment additives (chromate, wood preservative). Materials

containing asbestos may only be worked by specialists.

– As far as possible, use a dust extraction system suitable

for the material.

Sanding disc Material Application Grain size

– All wooden materials

(e. g., hardwood, soft-

wood, chipboard, build-

ing board)

– Metal materials

For coarse-sanding, e. g. of rough, unplaned beams and

boards

coarse 40

For face sanding and planing small irregularities

medium 80

100

120

For finish and fine sanding of wood

fine 180

240

320

400

–Paint

–Varnish

– Filling compound

–Filler

For sanding off paint

coarse 40

For sanding primer (e. g., for removing brush dashes,

drops of paint and paint run)

medium 80

100

120

For final sanding of primers before coating

fine 180

240

320

400

OBJ_BUCH-630-008.book Page 17 Tuesday, March 31, 2015 6:05 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch GOP 10.8 V-LI Professional Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info