Bedienungsanleitung Bosch GSC 10.8 V-LI Professional (Seite 11 von 160) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

592527

Zoom out

Zoom in

Vorherige Seite

1/160

Nächste Seite

English | 11

Bosch Power Tools 1 609 92A 0NT | (23.5.14)

10 Upper cutter

11 Bottom cutter

12 Adjustment screw, bottom cutter

13 Fastening screw for bottom cutter

14 Setting gauge*

*Accessories shown or described are not part of the standard de-

livery scope of the product. A complete overview of accessories

can be found in our accessories program.

Technical Data

Noise/Vibration Information

Sound emission values determined according to EN 60745.

Typically the A-weighted sound pressure level of the product

is less than 70 dB(A). Uncertainty K < 1.5 dB.

The noise level when working can exceed 80 dB(A).

Wear hearing protection!

Vibration total values a

(triax vector sum) and uncertainty K

determined according to EN 60745:

=3.5m/s

, K< 1.5 m/s

The vibration level given in this information sheet has been

measured in accordance with a standardised test given in

EN 60745 and may be used to compare one tool with anoth-

er. It may be used for a preliminary assessment of exposure.

The declared vibration emission level represents the main ap-

plications of the tool. However if the tool is used for different

applications, with different accessories or insertion tools or is

poorly maintained, the vibration emission may differ. This

may significantly increase the exposure level over the total

working period.

An estimation of the level of exposure to vibration should also

take into account the times when the tool is switched off or

when it is running but not actually doing the job. This may signif-

icantly reduce the exposure level over the total working period.

Identify additional safety measures to protect the operator

from the effects of vibration such as: maintain the tool and the

accessories, keep the hands warm, organisation of work pat-

terns.

Declaration of Conformity

We declare under our sole responsibility that the product de-

scribed under “Technical Data” is in conformity with all rele-

vant provisions of the directives 2011/65/EU, 2014/30/EU,

2006/42/EC including their amendments and complies with

the following standards: EN 60745-1, EN 60745-2-8.

Technical file (2006/42/EC) at:

Robert Bosch GmbH, PT/ETM9,

70764 Leinfelden-Echterdingen, GERMANY

Robert Bosch GmbH, Power Tools Division

70764 Leinfelden-Echterdingen, GERMANY

Leinfelden, 28.04.2014

Assembly

Battery Charging

 Use only the chargers listed in the technical data. Only

these chargers are matched to the lithium-ion battery of

your power tool.

Note: The battery supplied is partially charged. To ensure full

capacity of the battery, completely charge the battery in the

battery charger before using your power tool for the first time.

The lithium-ion battery can be charged at any time without re-

ducing its service life. Interrupting the charging procedure

does not damage the battery.

Battery Charge-control Indication

The three green LEDs of the battery charge-control indicator

4 indicate the charge condition of the battery 2. For safety

reasons, it is only possible to check the status of the charge

condition when the machine is at a standstill.

– To indicate the charge condition, press and hold button 3

of the switched off machine.

Removing the battery

– To remove the battery 2, press the unlocking buttons 1

and pull the battery out of the machine to the rear. Do not

exert any force.

Operation

Starting Operation

Inserting the battery

 Use only original Bosch lithium-ion batteries with the

voltage listed on the nameplate of your power tool. Using

other batteries can lead to injuries and pose a fire hazard.

Cordless Sheet Metal Shear GSC 10,8 V-LI

Article number

3 601 J26 1..

Rated voltage

V= 10.8

Stroke rate at no load n

min

-1

3600

Max. steel sheet cutting capacity

mm 1.3

Smallest curve radius

mm 15

Weight according to

EPTA-Procedure 01/2003

kg 1.4

Permitted ambient temperature

–during charging

– during operation* and during

storage

°C

0...+45

–20...+50

Recommended batteries GBA 10,8V...

Recommended chargers AL 11..

to 400 N/mm

with reference to steel sheet

* Limited performance at temperatures <0 °C

Henk Becker

Executive Vice President

Engineering

Helmut Heinzelmann

Head of Product Certification

PT/ETM9

LED Capacity

Continuous lighting 3 x green  2/3

Continuous lighting 2 x green  1/3

Continuous lighting 1 x green <1/3

Flashing light 1 x green Reserve

OBJ_BUCH-840-006.book Page 11 Friday, May 23, 2014 12:04 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch GSC 10.8 V-LI Professional Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info