Bedienungsanleitung Bosch gsr 12 0 vsh 2 (Seite 22 von 279) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

381287

Zoom out

Zoom in

Vorherige Seite

1/279

Nächste Seite

22 | English

2 609 932 649 | (17.8.09) Bosch Power Tools

The battery is equipped with a NTC temperature

control which allows charging only within a tem-

perature range of between 0 °C and 45 °C. A

long battery service life is achieved in this man-

ner.

A significantly reduced working period after

charging indicates that the battery is used and

must be replaced.

Observe the notes for disposal.

Auxiliary Handle (GSR 18 VE-2/

GSB 18 VE-2) (see figure A)

f Operate your machine only with the auxilia-

ry handle 5.

The auxiliary handle 5 can be set to any position

for a secure and low-fatigue working posture.

Turn the bottom part of the auxiliary handle 5 in

counterclockwise direction and swivel the auxil-

iary handle 5 to the desired position. Then

retighten the bottom part of the auxiliary handle

5 by turning in clockwise direction.

The clamping band 11 of the auxiliary handle

must be seated in the corresponding groove.

Changing the Tool (see figure B)

f Before any work on the machine (e. g.,

maintenance, tool change, etc.) as well as

during transport and storage, set the rota-

tional direction switch to the centre posi-

tion. Unintentional actuation of the On/Off

switch can lead to injuries.

The drill spindle is locked when the On/Off

switch 10 is not pressed. This makes quick, con-

venient and easy changing of the tool in the drill

chuck possible.

Open the keyless chuck 1 by turning in rotation

direction n, until the tool can be inserted. Insert

the tool.

Firmly tighten the collar of the keyless chuck 1

by hand in rotation direction o until the locking

action (“click”) is no longer heard. This automat-

ically locks the chuck.

The locking is released again to remove the tool

when the collar is turned in the opposite direc-

tion.

Replacing the Drill Chuck

f Before any work on the machine (e. g.,

maintenance, tool change, etc.) as well as

during transport and storage, set the rota-

tional direction switch to the centre posi-

tion. Unintentional actuation of the On/Off

switch can lead to injuries.

Removing the Securing Screw (see figure C)

The keyless chuck 1 is secured with a securing

screw 13 against unintentional loosening from

the drill spindle. Completely open the keyless

chuck 1 and unscrew the securing screw 13 in

rotation direction n. Please note that the se-

curing screw has a left-hand thread.

Removing the Drill Chuck (see figure D)

Clamp the short end of an Allen key 14 into the

keyless chuck 1.

Place the machine on a stable surface (e. g. a

workbench). Hold the machine firmly and loos-

en the keyless chuck 1 by turning the Allen key

14 in rotation direction n. Loosen a tight-seated

keyless chuck by giving the long end of the Allen

key 14 a light blow. Remove the Allen key from

the keyless chuck and completely unscrew the

keyless chuck.

Mounting the Drill Chuck (see figure E)

The keyless chuck is mounted in reverse order.

The drill chuck must be tightened with a

tightening torque of approx. 32 Nm.

Screw the securing screw 13 in anti-clockwise

direction into the opened keyless chuck, tight-

ening torque approx. 6–9 Nm. Always use a new

securing screw, as the threads are covered with

a thread-locking compound that loses its effect

after multiple usage.

Dust/Chip Extraction

f Dusts from materials such as lead-containing

coatings, some wood types, minerals and

metal can be harmful to one’s health. Touch-

ing or breathing-in the dusts can cause aller-

gic reactions and/or lead to respiratory infec-

tions of the user or bystanders.

OBJ_BUCH-199-004.book Page 22 Monday, August 17, 2009 8:32 AM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch gsr 12 0 vsh 2 Seite 22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info