786154
12
Zoom out
Zoom in
Vorherige Seite
1/171
Nächste Seite
12 | English
uAlways wait until the power tool has come to a com-
plete stop before placing it down. The application tool
can jam and cause you to lose control of the power tool.
uIn case of damage and improper use of the battery, va-
pours may be emitted. The battery can set alight or ex-
plode. Ensure the area is well ventilated and seek medical
attention should you experience any adverse effects. The
vapours may irritate the respiratory system.
uDo not open the battery. There is a risk of short-circuit-
ing.
uThe battery can be damaged by pointed objects such
as nails or screwdrivers or by force applied externally.
An internal short circuit may occur, causing the battery to
burn, smoke, explode or overheat.
uOnly use the battery with products from the manufac-
turer. This is the only way in which you can protect the
battery against dangerous overload.
Protect the battery against heat, e.g. against
continuous intense sunlight, fire, dirt, water
and moisture. There is a risk of explosion and
short-circuiting.
Product Description and
Specifications
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the beginning of this oper-
ating manual.
Intended Use
The power tool is intended for screwing in and loosening
screws.
Product Features
The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1) Screwdriver bita)
(2) Stop sleeve
(3) Adjusting sleeve for screw depth stop
(4) Screw depth stop
(5) Rotational direction switch
(6) Battery release button
(7) Batterya)
(8) Handle (insulated gripping surface)
(9) Worklight
(10) On/off switch
(11) Universal bit holdera)
a) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
Technical data
Cordless screwdriver GTB 12V-11
Article number 3601JE40..
Rated voltage V= 12
No-load speedA) min-1 0–3 000
Max. torque, hard screwdriv-
ing application according to
ISO 5393A)
Nm 3
Tool holder ¼" internal
hexagon
Max. screw diameter mm 4
Weight according to
EPTA-Procedure 01:2014B) kg 0.91–1.1
Recommended ambient tem-
perature during charging °C 0to+35
Permitted ambient temperat-
ure during operation and dur-
ing storage
°C –20to+50
Recommended rechargeable
batteries GBA 12V...
Recommended chargers GAL 12...
GAX 18...
A) Measured at 20–25°C with rechargeable battery GBA 12V
2.0Ah.
B) Measured withGBA 12V 2.0Ah andGBA 12V 6.0Ah.
Noise/Vibration Information
Noise emission values determined according to
EN62841-2-2.
Typically the A-weighted noise level of the power tool is:
Sound pressure level 74 dB(A); sound power level 85
dB(A). Uncertainty K=3dB.
Wear hearing protection
Total vibration values ah (triax vector sum) and uncertainty K
determined according to EN62841-2-2:
Screwdriving: ah < 2.5 m/s2, K = 1.5 m/s2.
The vibration level and noise emission value given in these
instructions have been measured in accordance with a
standardised measuring procedure and may be used to com-
pare power tools. They may also be used for a preliminary
estimation of vibration and noise emissions.
The stated vibration level and noise emission value repres-
ent the main applications of the power tool. However, if the
power tool is used for other applications, with different ap-
plication tools or is poorly maintained, the vibration level
and noise emission value may differ. This may significantly
increase the vibration and noise emissions over the total
working period.
To estimate vibration and noise emissions accurately, the
times when the tool is switched off or when it is running but
not actually being used should also be taken into account.
This may significantly reduce vibration and noise emissions
over the total working period.
1 609 92A 7PT | (02.05.2022) Bosch Power Tools
12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Bosch GTB 12V-11 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info