Bedienungsanleitung Bosch GUS 12V-300 (Seite 14 von 175) (Alle Sprachen)

786107

Zoom out

Zoom in

Vorherige Seite

1/175

Nächste Seite

14 | English

To switch off the power tool, slide the on/off switch(4)

backwards so that 0 appears on the switch.

Practical advice

uRemove the battery from the power tool before carry-

ing out work on the power tool (e.g. maintenance,

changing tool, etc.). The battery should also be re-

moved for transport and storage. There is risk of injury

from unintentionally pressing the on/off switch.

uDo not load the power tool so heavily that it comes to a

stop.

uNever touch the blade during operation.

The cutting performance of the power tool depends on the

materials to be cut and on the state of charge of the battery.

Excessive feed significantly reduces the performance of the

power tool, depending on the battery charge.

The guide runner(12) must be aligned parallel to the cutting

surface and must not become wedged during cutting.

Always keep the blade clean and free of material residue.

Improper use of the blade will cause it to become blunt.

Thin materials, such as fabrics, can be pulled into the power

tool during cutting and become wedged. To avoid this, do

not push too hard when working with these materials, in or-

der to ensure an optimal cut. Keep the material taut whilst

cutting and cut slowly.

Do not remove material that has been inserted during opera-

tion. Switch off the power tool with the on/off switch(4) be-

forehand.

Optimal cutting results are best achieved through practice.

Cut Control cutting-line mark

The red line on the protective guard(3) (Cut Control cutting-

line mark(2)) indicates the cutting line of the blade(10).

This enables you to guide the power tool precisely along the

cutting line marked on the material.

Temperature-dependent overload protection

In normal conditions of use, the power tool cannot be over-

loaded. If the power tool is overloaded or not kept within the

permitted battery temperature range, the speed is reduced

or the power tool switches off. At reduced speed, the power

tool will run again at full speed once the permitted battery

temperature is reached or the load is reduced. If it automat-

ically shuts down, switch the power tool off, allow the bat-

tery to cool down, then switch the power tool back on.

Recommendations for Optimal Handling of the Battery

Protect the battery against moisture and water.

Only store the battery within a temperature range of −20 to

50°C. Do not leave the battery in your car in the summer, for

example.

Occasionally clean the ventilation slots on the battery using a

soft brush that is clean and dry.

A significantly reduced operating time after charging indic-

ates that the battery has deteriorated and must be replaced.

Follow the instructions on correct disposal.

Maintenance and Service

Maintenance and Cleaning

uRemove the battery from the power tool before carry-

ing out work on the power tool (e.g. maintenance,

changing tool, etc.). The battery should also be re-

moved for transport and storage. There is risk of injury

from unintentionally pressing the on/off switch.

uTo ensure safe and efficient operation, always keep

the power tool and the ventilation slots clean.

During cutting, material residues may collect under the pro-

tective guard.

Clean the protective guard(3) regularly with a brush or a

slightly dampened cloth.

After-Sales Service and Application Service

Our after-sales service responds to your questions concern-

ing maintenance and repair of your product as well as spare

parts. You can find explosion drawings and information on

spare parts at: www.bosch-pt.com

The Bosch product use advice team will be happy to help you

with any questions about our products and their accessor-

ies.

In all correspondence and spare parts orders, please always

include the 10‑digit article number given on the nameplate

of the product.

Great Britain

Robert Bosch Ltd. (B.S.C.)

P.O. Box 98

Broadwater Park

North Orbital Road

Denham Uxbridge

UB 9 5HJ

At www.bosch-pt.co.uk you can order spare parts or arrange

the collection of a product in need of servicing or repair.

Tel. Service: (0344) 7360109

E-Mail: boschservicecentre@bosch.com

You can find further service addresses at:

www.bosch-pt.com/serviceaddresses

Transport

The recommended lithium-ion batteries are subject to legis-

lation on the transport of dangerous goods. The user can

transport the batteries by road without further require-

ments.

When shipping by third parties (e.g.: by air transport or for-

warding agency), special requirements on packaging and la-

belling must be observed. For preparation of the item being

shipped, consulting an expert for hazardous material is re-

quired.

Dispatch battery packs only when the housing is undam-

aged. Tape or mask off open contacts and pack up the bat-

tery in such a manner that it cannot move around in the

packaging. Please also observe the possibility of more de-

tailed national regulations.

1 609 92A 7ST | (18.05.2022) Bosch Power Tools

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch GUS 12V-300 Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info