Bedienungsanleitung Bosch GWS 18-125 PL Inox (Seite 22 von 364) (Alle Sprachen)

786329

Zoom out

Zoom in

Vorherige Seite

1/364

Nächste Seite

English | 23

Bosch Power Tools 1 609 92A 3ZX | (7.11.17)

Cutting Guide with Dust Extraction Protection Guard

The cutting guide with dust extraction protection guard 21 is

mounted in the same manner as the protection guard for

grinding 12.

Extraction Hood for Sanding

The extraction hood 7 can be used for low-dust sanding of

paint, varnish and plastics in conjunction with the carbide

grinding head 9 or the rubber sanding plate 17 with a sanding

sheet 18. The extraction hood 7 is not suitable for working

metals.

A suitable Bosch vacuum cleaner can be connected to the ex-

traction hood 7.

The extraction hood 7 is mounted in the same manner as the

protection guard 12. The brush collar is exchangeable.

Auxiliary Handle

Operate your machine only with the auxiliary handle 5.

Screw the auxiliary handle 5 on the right or left of the machine

head depending on the working method.

Hand Guard

For operations with the rubber sanding plate 17 or with

the cup brush/wheel brush/flap disc, always mount the

hand guard 16.

The hand guard 16 is fastened with the auxiliary handle 5.

Mounting the Grinding Tools

Before any work on the machine itself, pull the mains

plug.

Do not touch grinding and cutting discs before they

have cooled down. The discs can become very hot while

working.

Clean the grinder spindle 6 and all parts to be mounted.

For clamping and loosening the grinding tools, lock the grind-

er spindle with the spindle lock button 2.

Actuate the spindle lock button only when the grinder

spindle is at a standstill. Otherwise, the machine may be-

come damaged.

Grinding/Cutting Disc

Pay attention to the dimensions of the grinding tools. The

mounting hole diameter must fit the mounting flange without

play. Do not use reducers or adapters.

When using diamond cutting discs, pay attention that the di-

rection-of-rotation arrow on the diamond cutting disc and the

direction of rotation of the machine (see direction-of-rotation

arrow on the machine head) agree.

See graphics page for the mounting sequence.

To fasten the grinding/cutting disc, screw on the clamping nut

10 and tighten with the two-pin spanner; see Section “Quick-

clamping Nut”.

After mounting the grinding tool and before switching

on, check that the grinding tool is correctly mounted

and that it can turn freely. Make sure that the grinding

tool does not graze against the protection guard or oth-

er parts.

A plastic part (O-ring) is fitted around

the centring collar of mounting flange 8.

If the O-ring is missing or damaged,

the mounting flange 8 must be replaced

before resuming operation.

Flap Disc

For operations with the flap disc, always mount the

hand guard 16.

Rubber Sanding Plate

For operations with the rubber sanding plate 17, al-

ways mount the hand guard 16.

See graphics page for the mounting sequence.

Screw on the round nut 19 and tighten with the two-pin span-

ner.

Cup Brush/Disc Brush

For operations with the cup brush/wheel brush, always

mount the hand guard 16.

See graphics page for the mounting sequence.

The cup brush/disc brush must be able to be screwed onto

the grinder spindle until it rests firmly against the grinder

spindle flange at the end of the grinder spindle threads. Tight-

en the cup brush/disc brush with an open-end spanner.

Quick-clamping Nut

For convenient changing of grinding tools without the use of

additional tools, you can use the quick-clamping nut 11 in-

stead of the clamping nut 10.

The quick-clamping nut 11 may be used only for grind-

ing or cutting discs.

Use only a flawless, undamaged quick-clamping nut 11.

When screwing on, pay attention that the side of the

quick-clamping nut 11 with printing does not face the

grinding disc; the arrow must point to the index mark

26.

Lock the grinder spindle with

the spindle lock button 2. To

tighten the quick-clamping

nut, firmly turn the grinding

disc in clockwise direction.

OBJ_BUCH-3330-001.book Page 23 Tuesday, November 7, 2017 2:23 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch GWS 18-125 PL Inox Seite 22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info