Bedienungsanleitung Bosch GWX 14-125 (Seite 23 von 347) (Alle Sprachen)

786305

Zoom out

Zoom in

Vorherige Seite

1/347

Nächste Seite

English | 23

uAlways position the protective guard(7) such that the

two cams on the unlocking lever(1) engage in the

corresponding openings on the protective guard(7).

uAdjust the protective guard (7) such that sparking in

the direction of the operator is prevented.

uThe protective guard (7) must only be adjustable

while the unlocking lever (1) is actuated. Otherwise,

the power tool must not be used any more under any

circumstances and must be sent to the after-sales ser-

vice.

Note: The coding cams on the protective guard (7) ensure

that only a protective guard that is suitable for the power

tool can be fitted.

Protective guard for cutting

uFor cutting, always use the protective guard for

cutting(8) or the protective guard for grinding (7) to-

gether with the cover for cutting(11).

uProvide sufficient dust extraction when cutting stone.

The protective guard for cutting(8) is fitted in the same way

as the protective guard for grinding(7).

Metal cover for cutting

Fit the metal cover for cutting(11) on the protective guard

for grinding(7) (see figureA): Swivel the tool retainer back

(). Attach the cover(11) to the protective guard for

grinding(7) (). Press the tool retainer firmly into place on

the protective guard(7) ().

To remove the cover (see figureB), press the button on the

tool retainer () and swivel it back (). Remove the

cover(11) from the protective guard(7) ().

Plastic cover for cutting

Attach the plastic cover for cutting(11) to the protective

guard for grinding(7) (see figureC). The cover(11) audibly

and visually engages on the protective guard(7).

To remove the cover (see figureD), unlock the cover(11) on

the left- or right-hand side of the protective guard(7) ()

and remove the cover ().

Extraction guard for cutting with a guide block

The extraction guard for cutting with a guide block (23) is fit-

ted in the same way as the protective guard for grinding (7).

Hand guard

uAlways fit the hand guard (16) when working with the

rubber sanding pad (17) or with the cup brush/conical

brush/diamond annular cutter.

Attach the hand guard (16) to the side handle (5).

Standard auxiliary handle/low-vibration auxiliary handle

Screw the auxiliary handle (5)/(6) on the right or left of the

machine head depending on the working method.

uDo not operate your power tool without the auxiliary

handle(5)/(6).

uDo not continue to use the power tool if the auxiliary

handle (5)/(6) is damaged. Do not make any altera-

tions to the auxiliary handle (5)/(6).

The low-vibration auxiliary

handle (6) reduces vibra-

tion, enabling the tool to be

used safely and more com-

fortably.

Fitting and removing abrasive tools

Follow the special assembly instructions for

X-LOCK application tools.

uPull the plug out of the socket before carrying out any

work on the power tool.

uDo not touch grinding and cutting discs until they have

cooled down. The discs can become very hot while work-

ing.

uOnly use original X-LOCK application tools that carry the

X-LOCK logo. A maintained clamping gauge of max.

1.6mm can only be guaranteed with original X-LOCK ap-

plication tools. A higher clamping gauge can lead to insec-

ure clamping, potentially causing the clamp tool to come

loose.

uX-LOCK application tools do not need additional clamping

flanges or support flanges.

uMake sure that the application tool and the holder are not

deformed and are free from dirt and particles.

Pay attention to the dimensions of the abrasive tools.

Make sure that both X-LOCK catches are open (see figure

below) before fitting the X-LOCK application tool.

If necessary, clean the area between the two X-LOCK

catches.

Fitting the abrasive tool

Place the grinding/cutting/flap disc in a central position

on the X-LOCK holder, parallel to the bearing surface

and with the right side facing up.

Push the disc into the holder.

The disc audibly clicks into place. Do not actuate the

lever (3) when doing so.

Bosch Power Tools 1 609 92A 765 | (17.03.2022)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch GWX 14-125 Seite 23

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info