Bedienungsanleitung Bosch GWX 15-125 PS (Seite 19 von 301) (Alle Sprachen)

786312

Zoom out

Zoom in

Vorherige Seite

1/301

Nächste Seite

English | 19

(11) X-LOCK fibre disc A)

(12) X-LOCK clip for fibre discs A)

(13) Protective guard for cutting A)

(14) X-LOCK cutting disc A)

(15) X-LOCK holder

(16) Hand guard A)

(17) X-LOCK cup brush/disc brush A)

(18) Diamond core bit A)

(19) Handle (insulated gripping surface)

(20) Extraction guard for cutting with a guide block A)

(21) Diamond cutting disc A)

A) Accessories shown or described are not included with the

product as standard. You can find the complete selection of

accessories in our accessories range.

Technical Data

Angle grinder GWX 15-125 PS

Article number 3 601 GB9 0..

Rated power input W 1500

Power output W 820

Rated speed min-1 11,500

Speed adjustment range min-1 2800–11,500

Max. grinding disc diameter mm 125

Speed preselection ●

Restart protection ●

Constant electronic control ●

Starting current limitation ●

Kickback stop ●

Weight according to EPTA-

Procedure 01:2014

– with additional low-vibra-

tion auxiliary handle kg 2.5

– with standard auxiliary

handle kg 2.4

Protection class / II

The specifications apply to a rated voltage [U] of 230 V. These spe-

cifications may vary at different voltages and in country-specific mod-

els.

Noise/Vibration Information

Noise emission values determined according to

EN60745-2-3.

Typically, the A-weighted noise level of the power tool is:

Sound pressure level 91 dB(A); sound power level 102

dB(A). Uncertainty K=3 dB.

Wear hearing protection

Total vibration values ah (triax vector sum) and uncertainty K

determined according to EN60745-2-3:

Surface grinding (roughing):

ah=5.0 m/s2, K=1.5 m/s2,

Grinding with abrasive disc:

ah= m/s2, K=1.5 m/s2.

The vibration level given in these instructions has been

measured in accordance with a standardised measuring pro-

cedure and may be used to compare power tools. It can also

be used for a preliminary estimation of exposure to vibra-

tion.

The stated vibration level applies to the main applications of

the power tool. However, if the power tool is used for differ-

ent applications, with different application tools or poorly

maintained, the vibration level may differ. This can signific-

antly increase the exposure to vibration over the total work-

ing period.

To estimate the exposure to vibration accurately, the times

when the tool is switched off or when it is running but not ac-

tually being used should also be taken into account. This can

significantly reduce the exposure to vibration over the total

working period.

Implement additional safety measures to protect the oper-

ator from the effects of vibration, such as servicing the

power tool and application tools, keeping the hands warm,

and organising workflows correctly.

Fitting

Fitting protective equipment

uPull the plug out of the socket before carrying out any

work on the power tool.

Note: If the grinding disc breaks during operation or the

holding fixtures on the protective guard/power tool become

damaged, the power tool must be sent to the after-sales ser-

vice immediately; see the "After-sales service and advice on

using products" section for addresses.

Protective guard for grinding

Place the protective guard

(8) onto the holder on the

power tool until the coding

cams of the protective

guard are aligned with the

holder. When doing so,

press and hold the unlock-

ing lever (1).

Press the protective guard

(8) onto the spindle collar

until the shoulder of the

protective guard is sitting

on the flange of the power

tool and rotate the protect-

ive guard until it audibly

clicks into place.

Adjust the position of the protective guard (8) to meet the

requirements of the operation. To do this, push the unlock-

ing lever (1) upward and rotate the protective guard (8) into

the required position.

uAlways position the protective guard (8) such that all

three red cams on the unlocking lever (1) engage in

Bosch Power Tools 1 609 92A 4F9 | (10.01.2019)

3.0

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch GWX 15-125 PS Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info