Bedienungsanleitung Bosch HBG53R520 (Seite 12 von 28) (Englisch)

551202

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

Checking the time settings

If several time-setting options are set, the relevant symbols are

illuminated on the display. The symbol for the time-setting

option that is visible in the display is shown in brackets.

To call up the

U timer, r cooking time, p end time or 0

clock, press the

0 button repeatedly until the brackets are

around the relevant symbol. The display shows the value for a

few seconds.

Clock

After the appliance is connected or following a power cut, the

0 symbol and four zeros flash in the display. Set the clock.

1.Press the 0 button.

The clock in the display shows 12:00. The time symbols light

up and the brackets are around

2.Use the @ or A button to set the clock.

After a few seconds, the time that has been set is adopted.

Changing the clock

No other time-setting option should have been set.

1.Press the 0 button four times.

The time symbols light up in the display and the brackets are

around

2.Use the @ or A button to change the clock.

After a few seconds, the time that has been set is adopted.

Hiding the clock

You can hide the clock. For more information, please refer to

the section Changing the basic settings.

Childproof lock

The oven has a childproof lock to prevent children switching it

on accidentally.

The oven will not react to any settings. The timer and clock can

also be set when the childproof lock has been activated.

If the type of heating and temperature or grill setting have been

set, the childproof lock interrupts the heating.

Activating the childproof lock

No cooking time or end time should have been set.

Press and hold the D button for approx. four seconds.

The

D symbol appears in the display. The childproof lock is

activated.

Deactivating the childproof lock

Press and hold the

D button for approx. four seconds.

The

D symbol goes out in the display. The childproof lock is

deactivated.

Changing the basic settings

Your oven has various basic settings. These settings can be

customised to suit your requirements.

No other time-setting option should have been set.

1.Press and hold the 0 button for approx. 4 seconds.

The current basic setting for the clock display is shown in the

display, e.g. c1 1 for selection 1.

2.Use the @ or A button to change the basic setting.

3.Confirm by pressing the 0 button.

The next basic setting appears in the display. You can scroll

through all levels with the

0 button and change the setting

with the

@ or A button.

4.To finish, press and hold the 0 button for approx. 4 seconds.

All basic settings are applied.

You may change the basic settings at any time.

Cleaning system

The cleaning system regenerates the self-cleaning surfaces in

the cooking compartment.

The back wall, ceiling and side walls of the cooking

compartment are coated with a highly porous ceramic layer.

This coating absorbs and disintegrates splashes from baking

and roasting while the oven is in operation. If these self-

cleaning surfaces no longer clean themselves adequately, they

can be regenerated with the cleaning system.

Before cleaning

Remove accessories and cookware from the cooking

compartment.

Cleaning the cooking compartment floor

Before you set the cleaning system, clean the surfaces in the

cooking compartment that are not self-cleaning. Otherwise,

stains will develop that it is not possible to remove.

Use a dish cloth and hot soapy water or a vinegar solution. If

there are heavy deposits of dirt, use a stainless steel scouring

pad or oven cleaner. Only use when the cooking compartment

is cold. Never treat the self-cleaning surfaces with a scouring

pad or oven cleaner.

Basic setting Selection 1 Selection 2 Selection 3

c1 Clock display always* only with

the

0 but-

ton

c2 Signal duration

upon completion of

a cooking time or

timer period

approx.

10 seconds

approx.

2 minutes*

approx.

5minutes

c3 Waiting time until a

setting is applied

approx.

2seconds

approx.

5seconds*

approx.

10 seconds

* Factory setting

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch HBG53R520 Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info