11
When the time has elapsed
A signal sounds. The time has elapsed. The display shows
‹‹:‹‹. Press the 0 button. The display goes out.
Cancelling the timer time
Press the
0 button to open the time-setting options menu.
Using the rotary selector, turn the time back to
‹‹:‹‹. Press
the
0 button to close the menu.
Changing the timer time
Press the
0 button to open the time-setting options menu. Use
the rotary selector to change the time within the next few
seconds. Press the
0 button to close the menu.
Setting the cooking time
You can set a cooking time for your dish in the ó main oven.
Operation is ended automatically after this time. The main oven
stops heating.
Prerequisite: A type of heating and temperature are set for the
main oven.
Example shown below: Setting for % Top/bottom heating,
180 °C, cooking time of 45 minutes.
1. Press the
0 button. The time-setting options menu appears.
The time-setting options are displayed in the left-hand side of
the display. The [
U] timer function is selected.
2. Switch to the [r] cooking time using the X button.
3. Set the cooking time using the rotary selector.
4. Press the
0 button. The time-setting options menu closes.
If operation has not yet been started
5. Press the
n button.
The cooking time starts counting down.
The cooking time has elapsed
A signal sounds. The main oven stops heating. The cooking
time is at
‹‹:‹‹. You can cancel the signal earlier by pressing
the
0 button.
Cancelling the cooking time
Press the
0 button to open the menu. Using the X button,
switch to the [
r] cooking time and use the rotary selector to
set the cooking time to
‹‹:‹‹. Press the 0 button to close
the menu.
Changing the cooking time
Press the
0 button to open the menu. Using the X button,
move to the [
r] cooking time and set the cooking time using
the rotary selector. Press the
0 button to close the menu.
Setting a later end time
You can delay the end time for the ó main oven. This is
possible for
■ all types of heating
■ a variety of programmes
■ the cleaning system
Example: You put the dish in the main oven at 9 :30. It takes
45 minutes to cook and will be ready at 10:15 However, you
would like it to be ready at 12:45 instead. Change the end time
from 10 :15 to 12 :45 . The operation starts at 12:00 and ends
at 12:45.
Please remember that easily spoiled foods must not be allowed
to remain in the cooking compartment for too long.
Prerequisite: A cooking time is set. Operation has not yet been
started. The
0 time-setting options menu is open.
1. Switch to the [
p] end time using the X button.
2. Use the rotary selector to set a later end time.
3. Press the
0 button to close the time-setting options menu.
4. Confirm by pressing the
n button.
The main oven is on standby. The [p] end time is shown in
the clock display. As soon as operation starts, you will see
the cooking time counting down.
The cooking time has elapsed
A signal sounds. The main oven stops heating. The cooking
time is at
‹‹:‹‹. You can cancel the signal earlier by pressing
the
0 button.
Correcting the end time
This is only possible as long as the oven is in [
p] standby.
Press the
0 button to open the menu. Move to the end time
using the
X button. Adjust the end time using the rotary
selector. Press the
0 button to close the menu.
Cancelling the end time
This is possible, providing the oven is on standby. Select the
menu with the
0 button and move to the end time using
the
X button. Turn the rotary selector anti-clockwise until the
current end time is reached. The cooking time immediately
starts to count down.
