Bedienungsanleitung Bosch LR 60 (Seite 16 von 253) (Alle Sprachen)

786509

Zoom out

Zoom in

Vorherige Seite

1/253

Nächste Seite

16 | English

Laser receiver LR 60 LR 65G

– With GRL650CHVG – 325m

Reception angle ±35° ±35°

Receivable rotation speed >120min−1 >120min−1

Reception accuracyB)C)

– Very fine ±0.5mm ±0.5mm

– Fine ±1mm ±1mm

– Medium ±2mm ±2mm

– Coarse ±5mm ±5mm

– Very coarse ±10mm ±10mm

Operating temperature –10°C to +50°C –10°C to +50°C

Storage temperature –20°C to +70°C –20°C to +70°C

Max. altitude 2000m 2000m

Relative air humidity max. 90% 90%

Pollution degree according to IEC61010-1 2D) 2D)

Bluetooth® laser receiver

– Class 1 1

– Compatibility Bluetooth®5.0/4.X (Low En-

ergy)E)

Bluetooth®5.0/4.X (Low En-

ergy)E)

– Max. signal rangeF) 100m 100m

– Operating frequency range 2402–2480MHz 2402–2480MHz

– Max. transmission power 6.3mW 6.3mW

Batteries 2×1.5V LR6(AA) 2×1.5V LR6(AA)

Approx. operating time 50h 50h

Weight according to EPTA-Procedure01:2014 0.38kg 0.38kg

Dimensions (length × width × height) 175×79×33mm 175×79×33mm

Protection rating IP 67 IP 67

A) The working range may be reduced by unfavourable environmental conditions (e.g. direct sunlight).

B) Dependent on the distance between the laser receiver and the rotary laser and on the laser class and laser type of the rotary laser

C) The reception accuracy may be reduced by unfavourable environmental conditions (e.g. direct sunlight).

D) Only non-conductive deposits occur, whereby occasional temporary conductivity caused by condensation is expected.

E) When using Bluetooth® Low Energy devices, it may not be possible to establish a connection depending on the model and operating system.

Bluetooth® devices must support the SPP profile.

F) The signal range may vary greatly depending on external conditions, including the receiving device used. The Bluetooth® range may be signi-

ficantly weaker inside closed rooms and through metallic barriers (e.g. walls, shelving units, cases, etc.).

For clear identification of your laser receiver, see the serial number (12) on the type plate.

Assembly

Inserting/Changing the Batteries

Alkali-manganese batteries are recommended for the laser

receiver.

Turn the locking mechanism(14) of the battery compart-

ment cover into position (e.g. using a coin). Open the

battery compartment cover(13) and insert the batteries.

When inserting the batteries, ensure that the polarity is cor-

rect according to the illustration on the inside of the battery

compartment.

Close the battery compartment cover(13) and turn the lock-

ing mechanism(14) of the battery compartment cover into

position .

The battery indicator(i) shows the state of charge of the bat-

teries of the laser receiver:

Indicator Capacity

50 − 100%

5 − 50%

2 − 5%

1 609 92A 7M6 | (12.05.2022) Bosch Power Tools

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch LR 60 Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info