Bedienungsanleitung Bosch MMBV6 (Seite 21 von 236) (Alle Sprachen)

700733

Zoom out

Zoom in

Vorherige Seite

1/236

Nächste Seite

Preparation

Lid with vacuum seal

For an air-tight seal on the blender jug,

ToGo bottle and storage containers. To

remove a lid with vacuum applied, first

grip the vacuum seal at one end and pull

it up. Sufficient air has to get inside for the

lid to be removed. The lids of the storage

containers are equipped with a date

indicator. Turn the two rings to set the day

and month when the food was added.

Safety systems

The appliance has various safety systems.

X

Preparation

W Risk of injury

– Do not reach into the blender knife. Grip

the blade insert by the plastic only.

– Do not insert the mains plug until

all preparations for working with the

appliance are complete and the blender

jug has been correctly positioned on the

base unit.

Warning!

When the blender is assembled, do not lift

it by the handle of the blender jug. To lift

the blender, always grip it by the base unit/

motor block.

X Image sequence B

1. Unwind the power cord to the required

length.

Important: Make sure that the power cord

runs through the cable opening on the

underside of the appliance.

2. Place the base unit on a stable and level

work surface. Open the cap completely.

3. Turn the blender jug upside down and fit

the blade insert with the sealing ring in it

as shown.

4. Fit the lid of the blender jug onto the

blade insert.

5. Rotate the blade insert clockwise to the

stop with the help of the lid.

6. Remove the lid.

Important: The recesses on the blade

insert must be aligned with those on the

blender jug.

7. Turn the blender jug up the right way

and position on the drive as shown.

Marking pointing to .

8. Rotate the blender jug clockwise to the

stop. Marking pointing to .

9. Prepare the food and add to the blender

jug. Do not exceed the marking .

Note: Always blend food with sufficient

liquid as this will produce a better result.

When adding ingredients liable to froth up

such as milk and dairy products, do not

exceed the marking

10. Fit the lid and press on firmly. Observe

the recess on the handle when doing so.

Note: The lid can only be fitted in this

position.

11. Close the cap and press down to the

stop.

12. Insert the mains plug.

Note: The blender can only be used if the

following conditions are met.

– The blade insert and lid must be

properly connected to the blender jug.

– The blender jug must be properly

connected to the base unit.

– The cap must be completely closed.

Use

Note: Table K shows further examples

of application. The preparation can be

carried out with an automatic programme or

manually in single steps (1, 2, 3).

Usage informations:

– This appliance is not suitable for making

mayonnaise.

– This appliance is not suitable for

cutting and chopping semi-solid or

solid food (parsley, onion, meat, nuts,

parmesan cheese), but could be used in

combination with liquids. X Table K

– This appliance is not suitable for

making nuts spreads (hazelnut cream,

nutella, …).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch MMBV6 Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info